Electronics>Flight Controllers>AIO (All in One) FCs

SpeedyBee F745 AIO 25.5×25.5mm 35A BLHeli_S

4.50 out of 5
(2 customer reviews)

The SpeedyBee F745 AIO includes an F745 flight controller and a 35A ESC. Featuring a BMP280 barometer, OSD, 8MB Memory Blackbox, and MPU600 Gyro… this AIO board is the perfect addition to your FPV build.

$224.99

Hurry! Only 2 left in stock

Ships from our Tauranga warehouse
SKU: 2516 Category:

Description

The SpeedyBee F745 AIO includes an F745 flight controller and a 35A ESC. Featuring a BMP280 barometer, OSD, 8MB Memory Blackbox, and MPU600 Gyro… this AIO board is the perfect addition to your FPV build.

Features
Wireless ESC firmware flashing + full BLHeli_S configuration
Wireless FC firmware flashing + full Betaflight configuration
Powerful and Durable 35A 6S ESC with TOSHIBA MOSFETs
4 UARTS + Barometer + I2C pads + 8MB BlackBox flash
Change motor directions wirelessly
DJI plug for simpler digital build
Powerful F745 FC + 35A ESC

Specifications

  • Dimensions: 36.5mm(L) x 36.5mm(W) x 7mm(H), recommended for quads at 3.5″ or above
  • MountinPattern:  25.5 x 25.5mm, 3mm hole diameter
  • Power Input:  3S – 6S Lipo
  • Weight: 10.1g

FLIGHT CONTROLLER

  • USB Connection: Need to solder a USB TYPE-C module to D+, D-, GND pads.
  • 5V Output: 4 groups of 5V output. The total current load is 2.5A.
  • SmartPort: Use any TX pad of UART for the SmartPort feature.
  • BLE Bluetooth: Supported. Used for parameter configuration
  • UART: Full UART * 4(UART1, UART2, UART3, UART4)
  • 3.3V Output: Supported. Up to 500mA current load.
  • Supported Flight Controller: BetaFlight(Default)
  • Firmware Target Name: SPEEDYBEE F745AIO
  • Buzzer: BZ+ and BZ- pad used for 5V Buzzer
  • BetaFlight Camera Control Pad: Yes(CC pad)
  • Flash FC Firmware Wirelessly: Supported
  • Download/Analyze Blackbox: Supported
  • BOOT Button: Used to enter DFU mode
  • Current Sensor: Supported. Scale=256
  • DJI Air Unit 6-pin Connector: Built-in.
  • LED Pad Used for WS2812 LED
  • ESC Telemetry UART: None
  • RSSI Input: Not supported
  • Flash(for BlackBox): 8MB
  • ESC Signal Pads M1 – M4
  • IMU(Gyro): MPU6000
  • Barometer: BMP280
  • MCU: STM32F745
  • 9V Output: None
  • OSD: Supported
  • I2C: Supported.

ESC

  • Current Sensor: Supported(Sacle=256)
  • ESC Protocol: DSHOT300/600
  • Firmware: BLHeli_S JH40
  • Continuous Current: 35A
  • Burst Current: 45A(5S)
  • Power Input: 3-6S LiPo
  • Power Output: VBAT

Additional information

Brand

2 reviews for SpeedyBee F745 AIO 25.5×25.5mm 35A BLHeli_S

  1. 4 out of 5

    Youfu (verified owner)

    Great feature packed AIO however the ESC firmware of 3 of the 4 ESCs didn’t match what it should be in the manual but I was still able to flash bluejay and so far, everything works fine.

  2. 5 out of 5

    Antonius Scholte (verified owner)

    Great service!

Only logged in customers who have purchased this product may leave a review.