EMAX TinyHawk 3 Ready To Fly Racing Drone Package

Description

What is the TinyHawk 3 RTF Drone Kit?

The EMAX TinyHawk 3 RTF Drone Kit is the ultimate starter package for anyone wanting to begin flying FPV racing drones! The full package contains everything you need to start flying an FPV drone including the transmitter and FPV goggles. The EMAX TinyHawk 3 is a Micro Quadcopter equipped with a modern STM32F411 processor, FPV Runcam camera and brushless motors. The RTF kit includes all the chargers you need for your goggles and drone.

TinyHawk 3 vs TinyHawk 2

The TinyHawk 3 RTF kit has improved on many of the features in the TinyHawk 2. The controller and goggles are hugely improved and feature a removeable screen and full hobby-grade gimbals on the controller. The TinyHawks frame has also had a drastic redesign centered around durability with a key focus on strengthening every weak point in the frame. Ultimate reliability is achieved keeping the motors and electronics safe within the internals of the drone.

Power Refined

The TinyHawk III also features new modifications to the proven TinyHawk power system. With newly redesigned internals to the motors paired together with a new quad blade propeller, improved efficiency and flight time is achieved providing better piloting experience for all skill levels.

Repairability

Repairing a racing drone is inevitable which is why the TinyHawk 3 was designed with some quality of life improvements such as a centralized mount in order to access the internals as well as improved motor plugs for the ability to quickly swap out motors between rounds at a racing event.

Ready To Fly

Unveiled with the TinyHawk III is also the reimagined Transporter 2 FPV Goggle featuring a detachable screen which can be optionally paired to the brand new E8 transmitter, allowing pilots to customize their flying experience to suit their needs.

EMAX TinyHawk 3 RTF Features:

• 76mm durable polypropylene frame.
• TH0802 brushless motors at 15000kv.
• Unique inverted motor design to keep center of gravity low
• VTX Smart-Audio function to change video channels from the OSD with 25/100/200mW power output
• FrSky D8 SPI receiver
• Pre-tuned PID profiles made by Expert drone racers
• On-screen display to show your battery voltage and other information inside the goggles
• Compatible with 1S (4.2V) 450mAh batteries
• Approximately 400m max range

Included in the RTF kit:

• 1 x TinyHawk III Racing Drone
• 1 x Transporter 2 FPV Goggles
• 1 x E8 Transmitter 2
• 1 x 1S/2S Battery charger
• 1 x TH Avan 4-blade spare propeller set
• 1 x 450mAh 1S Emax Battery
• 1 x FPV Screen mount for E8 Controller
• Charging cables
• 1 x Spare hardware set
• 1 x Hard carry case

Fully Configurable via Betaflight Configurator

The EMAX TinyHawk drone comes completely ready to fly in its stock configuration, however when you’re ready to take things to the next level and want to explore more of the advanced level settings, you can plug your TinyHawk into a computer running Betaflight Configurator software. Betaflight is an open-source firmware pre-installed on almost every FPV drone. The computer-based configurator software allows you to make changes to the flight performance and options which are stored onboard the drone’s flight controller.

Some of the settings you can change via Betaflight Configurator are:

• Turtlemode – Flip your drone over after a crash by spinning the propellers the opposite way
• RC Rate settings – Make your transmitter sticks more sensitive and responsive
• PID settings – Fine tune the way your drone flies by applying a custom PID tune
• Acro trainer – Practice flying ‘Acro’ mode with a trainer which prevents you from tilting too far
• OSD settings – Put your own name on the OSD so everyone knows its you flying!

Upgrade Any Component in the RTF Drone Kit

When EMAX designed the TinyHawk RTF kit, they made a design decision to make all the components completely modular. This means if you outgrow any of the individual components in the RTF kit, you can swap them out for upgraded components. If you’d rather fly the TinyHawk with a set of FatShark goggles, you can do so! If the controller becomes too limiting, you can upgrade to a FrSky Taranis. The controller and FPV goggles in the kit also work with any other drone running a 5.8GHz video transmitter (almost every FPV drone) and FrSky D8 protocol.

Upgrades and Battery Choices for the EMAX TinyHawk

The EMAX TinyHawk has a range of upgrades which can improve your FPV experience. The drone is built in a modular design, which allows you to swap motors simply by plugging in new ones (no soldering required!) and put new propellers on with ease. If you’d rather rock your own style with black or purple propellers, you can do so!

Parts and Upgrades:

• 3-blade Avan TinyHawk Propellers (4 Colours) – These propellers are the stock propellers and are a great lightweight choice.
• 4-blade Avan TinyHawk Propellers (3 Colours) – With 4-blades, you have a bit more thrust which allows you to use turtlemode.

Batteries:

• Official EMAX 450mAh 1S Battery – The stock battery is a high-quality battery designed with durability and power in mind
• GNB 450mAh 1S Battery – The GNB version of the TinyHawk battery boasts an extremely high discharge rating for max power all the way through your flight

Instruction Manuals

• EMAX TinyHawk III BNF Quadcopter
• EMAX TinyHawk III RTF Instructions
• EMAX Transporter 2 FPV Goggles
• EMAX E8 Radio Transmitter

Videos