Mateksys ExpressLRS 2.4G PWM Receiver 6PWM
Perfect for Gliders, Plane, and FPV Wing pilots, the ELRS-R24-P6 provides a 6xPWM output ExpressLRS receiver for use without a FC
$29.99
or 6 weekly interest free payments of NZD $4.99 with
Hurry! Only 3 left in stock
Description
Perfect for Gliders, Plane, and FPV Wing pilots, the ELRS-R24-P6 provides a 6xPWM output ExpressLRS receiver for use without a FC
Note this is ExpressLRS v3.0 not compatible with your V2.4 gear.
ELRS-R24-P6 Specifications
- ESP8285, SX1281
- Antenna connector: IPEX MHF 1
- 6x PWM outputs
- Support 2~8S VBat voltage sense
- RF Frequency: 2.4GHz (2400~2480MHz)
- Telemetry power: 12dbm
- Receiver output protocol: PWM
- Input voltage: 4~9V DC @ “+” pad
- Voltage sense: 34V Max. @ “VBat” pad
- Power dissipation: 45mA(binding), 85mA(wifi mode)
- PCB size: 20mm x 18mm
- Weight: 2g w/ antenna
- Packing:
- 1x ELRS-R24-P6
- 1x IPEX MHF1 Antennas. 15cm
- Dupont 2.54 pins (Board is shipped unsoldered)
Firmwares
- ExpressLRS 3.0 or newer, DIY 2.4 GHz / DIY 2400 RX PWMP EX
- ExpressLRS wiki for PWM receiver, Click HERE
- Make sure Receiver and TX module both are running ExpressLRS 3.0 or newer
Receiver has ExpressLRS 3.0 preloaded with binding phrase “123456”, the Receiver will never enter binding mode if using the traditional binding procedure.
You need to reflash it with your binding phrase OR go into WebUI to set your binding phrase.
Flashing via Wifi
- Disconnect ESC and servos from receiver first.
- Power on receiver by 5V source. Receiver’s LED(Red) will blink slow at first, and after 20s, it should blink fast indicating it’s on Wifi Hotspot Mode.
- More detailed steps, pls refer this page.
- Target: DIY 2.4 GHz / DIY 2400 RX PWMP EX
Flashing via UART
- Disconnect ESC and servos from receiver first.
- Wire the receiver into the USB-TTL adapter, with TX on receiver connected to the Rx on the USB-TTL, and RX on receiver connected to the Tx of the USB-TTL. Wire 5V and GND of the USB-TTL to 5V and GND of the Receiver.
- Press the boot button while powering on the receiver, then release – the Red LED on receiver should now be solid.
- Select the target DIY 2.4 GHz / DIY 2400 RX PWMP EX and “UART” for Flashing Method, set your bind phrase and Firmware Options and once done, click on Build and Flash.
Additional information
Brand | |
---|---|
Protocol |
6 reviews for Mateksys ExpressLRS 2.4G PWM Receiver 6PWM
Only logged in customers who have purchased this product may leave a review.
Related products
-
Sale!
Jumper R8 II 16CH RC FrSky D16 D8 PWM SBUS Output
5.00 out of 5(2)$54.99Original price was: $54.99.$24.99Current price is: $24.99.In stockAdd to cart -
RadioMaster R81 8CH SBUS 2.4GHz Nano Receiver
4.83 out of 5(12) $34.99In stockAdd to cart -
TBS Crossfire Nano Diversity Receiver
5.00 out of 5(3) $109.99In stockAdd to cart -
TBS Crossfire Receiver Nano – Special Edition
4.92 out of 5(48) $62.90In stockAdd to cart -
TBS Tracer Sixty9 (VTX + Rx AIO)
5.00 out of 5(5) $84.99Out of stockRead more -
Antenna Tubing End Caps (10pcs)
4.88 out of 5(8) $2.99In stockAdd to cart
Explore more from Mateksys
-
Mateksys RC Helicopter Flybarless Controller G474-HELI
5.00 out of 5(1) $94.99Out of stockRead more -
Mateksys F405-WING-V2 Flight Controller
$109.99In stockAdd to cart -
Mateksys 2812 6-LED Board (Qty 4)
5.00 out of 5(1) $11.99In stockAdd to cart -
Mateksys 2812 4-LED Board (Qty 4)
5.00 out of 5(3) $10.49In stockAdd to cart -
Mateksys 2812 LED Controller V2
5.00 out of 5(1) $13.99In stockAdd to cart -
Mateksys Crossfire to PWM Converter CRSF-PWM-V10
5.00 out of 5(1) $18.99In stockAdd to cart
Other products in the collection ExpressLRS
-
RadioMaster ExpressLRS UART Firmware flashing Dongle
4.00 out of 5(1) $24.99In stockAdd to cart -
BetaFPV ExpressLRS 2.4G Lite Reciever Flat Antenna V1.1
5.00 out of 5(5) $26.99Out of stockRead more -
HappyModel VTx 5.8Ghz Dipole Antenna for Mobula6 2 Pieces
$4.99Out of stockRead more -
Happymodel Moxon 2.4GHz antenna for ExpressLRS TX module SMA
$14.99In stockAdd to cart -
HappyModel TCXO ExpressLRS EPW6 2.4GHz 6CH PWM Receiver
5.00 out of 5(1) $31.99In stockAdd to cart -
Mateksys ExpressLRS 2.4G Diversity Receiver
4.89 out of 5(9) $36.99In stockAdd to cart
Other ExpressLRS you might like
-
RadioMaster Boxer Radio Transparent Edition (ExpressLRS)
5.00 out of 5(2) $329.99In stockAdd to cart -
RadioMaster Boxer Radio (4in1/ExpressLRS)
4.95 out of 5(20) $309.99In stockSelect options -
RadioMaster ER4 2.4GHz 4Ch ExpressLRS PWM Receiver
5.00 out of 5(2) $31.99In stockAdd to cart -
BetaFPV ExpressLRS Recovery Dongle
5.00 out of 5(3) $13.99Out of stockRead more -
RadioMaster DJI RS2 & RS3 Pro Compatible ExpressLRS 2.4ghz gimbal RX
$99.99In stockAdd to cart -
HappyModel TCXO ExpressLRS 2.4GHz EP2 Nano Receiver ELRS
5.00 out of 5(10) $27.99Out of stockRead more
Other Wings you might like
-
EMAX ES0803M Servo Horn Set & Screws
5.00 out of 5(2) $4.99In stockAdd to cart -
HQProp Slow Flyer Pusher 7x4O CW
$5.99In stockAdd to cart -
HQProp Thin Electric Prop 6×4.5E CCW
5.00 out of 5(4) $4.99Out of stockRead more -
Emax ES08D II Digital Nylon Gear Servo
3.00 out of 5(2) $11.99In stockAdd to cart -
Gemfan 1045 Carbon Fiber Nylon 10×4.5 Electric Propeller (1L 1R)
$8.99In stockAdd to cart -
Mateksys F411-WTE Flight Controller
5.00 out of 5(8) $89.99In stockAdd to cart
Other Receivers you might like
-
RadioMaster ER8GV 2.4GHz 8Ch with Vario ExpressLRS PWM Receiver
5.00 out of 5(2) $79.99In stockAdd to cart -
TBS Crossfire Receiver Nano – Special Edition
4.92 out of 5(48) $62.90In stockAdd to cart -
RadioMaster UFL 2.4Ghz T Antenna for ELRS Receivers (65mm/95mm)
$9.99In stockSelect options -
HappyModel TCXO ExpressLRS 2.4GHz EP2 Nano Receiver ELRS
5.00 out of 5(10) $27.99Out of stockRead more -
Mateksys Crossfire to PWM Converter CRSF-PWM-6
$12.99In stockAdd to cart -
RadioMaster ExpressLRS 2.4GHz RP3 V2 TCXO Nano Receiver
5.00 out of 5(5) $46.99In stockAdd to cart
Simon (verified owner) –
Nice
Will (verified owner) –
Excellent price. Be aware if your new to FPV stuff, the embedded systems are far more complicated than traditional receivers so make sure you aske for help from someone in the know. Plenty of support for the product online though. Fantastic customer service. Will be purchasing from the store again!
Anonymous (verified owner) –
Anonymous (verified owner) –
Jac C. (verified owner) –
Nice small ELRS PWM receiver. Only gripe is it uses generic firmware rather than Matek specific. Was a little confusing to update the firmware cause of this. Also works well as a crfs mode receiver if you want flexibility
Graham (verified owner) –