RC Radios>Receivers

Jumper R8 II 16CH RC FrSky D16 D8 PWM SBUS Output

5.00 out of 5
(1 customer review)

The R8 receiver is the first receiver that can directly transmit the PIXs and PX4 flight control data (TX, RX) to the remote control of the world, and can display the flight control data to the remote control through the APM script!

$54.99

or 6 weekly interest free payments of NZD $9.16 with

In Stock at KiwiQuads

Ships from our Tauranga warehouse
SKU: 2419 Category:

Description

JumperRC R8 II 16CH RC Receiver Compatible T16 FrSky D16 D8 Mode Support PIX/PX4/APM Flight Controller PWM SBUS Output

OVERVIEW:
The R8 receiver is the first receiver that can directly transmit the PIXs and PX4 flight control data (TX, RX) to the remote control of the world, and can display the flight control data to the remote control through the APM script!
Since then, don’t have to install additional converters for getting data back from PIXs, PX4.

Specifition:
Item name: Jumper R8 II Receiver
Number of channels: 8ch (PWM) / 16ch (SBUS)
RSSI (Signal Strength Indication) output: PWM
Operating voltage range: 4.0~8.4V
Operating current range: [email protected]
Effective distance: full distance (>2.0km)
Weight: 10g
Compatibility: FrSky D8 D16 mode
Features:
– More channels: 1-8 channels from traditional channel output, 1-16 channels from SBUS port
– RSSI output: analog voltage output (03.3V)
– Two-way full duplex transmission (Telemetry)
With RSSI output: analog voltage output (03.3V)
Pair code method:
1. Press the bind button on the receiver, red/green LED solid on
2. On radio side, select Frsky D16 protocol (T12/T16: Multi Frsky D16);
3.When Red LED is flashing, binding succeeded.
4. After binding, withdraw the binding mode and power up the receiver again.  Green Led turns solid on.
 LED color description.
(The green light is always on: the signal is good; the green light is blinking: the signal is bad; the red light is always on: the signal is lost)

Package Included:
1 x R8 II Receiver

Additional information

Brand

Protocol

1 review for Jumper R8 II 16CH RC FrSky D16 D8 PWM SBUS Output

  1. 5 out of 5

    Nigel C. (verified owner)

    Geat, FYI transmiter neads to be on v2 firmware to bind.

Only logged in customers who have purchased this product may leave a review.