FPV Racing Drones>BNF/PNP Drones>Analog FPV BNF Drones

HappyModel Mobula7 1S HD 1080P (FrSky / ExpressLRS)

4.67 out of 5
(3 customer reviews)

Record in HD with the Mobula7 1s HD featuring Runcam Split which records 1080P DVR!


or 6 weekly interest free payments of NZD $49.99 with

SKU: N/A Categories: ,


This new Mobula7 1s HD is capable of recording 1080p HD footage all under the proven form factor and power of 1S. This Whoop has the latest RS0802 brushless motors from Happymodel as well as a new 5in1 ExpressLRS AIO flight controller perfect for brushless whooping.

We reccomend flying with 1s HV 450Mah batteries for a 5min flight time.

Wheelbase: 75mm
Size: 99mm*99mm*40mm
Weight: 24g
Motors : Brushless RS0802 20000KV
Propellers : Gemfan 1610-2 bi-blade (4CW+4CCW)
Camera : Runcam Split3-Lite Camera+1080P DVR
VTX : Onboard 5.8G Openvtx 0mW~400mW


X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and Openvtx
VTX Power up to 400mw
ELRS V2.0 Support
NEW RS0802 KV20000 motors
RunCam Split3-LiteSmooth and powerful
Compatible for 1S Lipo/LIHV
Recommend 1S 450mah/720mah battery (Not included)


RunCam Split3-Lite:

  • Field of View(FOV):Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3)
  • Video Resolution:1080@60fps/1080@50fps/1080@30fps/720@60fps
  • Video File Format: MOV
  • Image Resolution:2 MP
  • TV Mode: NTSC (720*480)/PAL (720*576) Switchable
  • Interface: JST 1.25mm / UART and SH 1.0mm
  • Max Micro SD Card Supported  64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III)
  • Hole Distance of Installation: 25.5*25.5mm
  • PCB Size: 29*29mm
  • Lens Module Size: 14*14mm
  • Lens Specs: M9
  • Power Input: DC 5-20V(Non-direct power supply from battery. Powered directly with battery will generate surges and burn the camera.)
  • Working Current: 450mA @5V


1x Mobula7 1s HD BNF Drone

1S parallel charging board
Propeller disassemble tool
Extra camera canopy

Does NOT include Batteries


Spare Parts:

HappyModel Mobula7 1s Spare Canopy

HappyModel X12 AIO Flight Controller

HappyModel RS0802 Motor

HappyModel Mobula7 V4 Frame

Gemfan 1610-2 Props



CNHL 450mAh 3.8V HV 1S 70C Lipo Battery

Emax TinyHawk 450mAh 1S Battery

Longer flight times: GNB Battery 3.8V 100C 720mAh 1S


VIFLY WhoopStor V2 6 Ports 1S Storage Charger Discharger

TBS Micro 1S Battery Charger V2

Additional information




Frame Size

3 reviews for HappyModel Mobula7 1S HD 1080P (FrSky / ExpressLRS)

  1. 5 out of 5

    David (verified owner)

    Fly’s nice and the footage is so clean. Was surprised by the camera quality.

  2. 5 out of 5

    Philipp Inozemtsev (verified owner)

  3. 4 out of 5

    Ming J. (verified owner)

    good whoop with nice picture. Solid strong canopy.
    It need right firmware to get elrs3.0 work, otherwise will have signal cutting issue.
    The runcam split 3 doesn’t connect with flight controller due to f411 only have 2 serials ports. I tried using soft serials and find out only rx2 port can be used under betaflight 4.4 firmware, all others include led strip pin are having issues. So my config is camera control connected to tx1rx1. Rewire blackbox to tx2 and smart audio to rx2 with soft serial. Now tried over 10 battery cycles, no issues happen so far.

Only logged in customers who have purchased this product may leave a review.