FPV Racing Drones>BNF/PNP Drones>Analog FPV BNF Drones

HappyModel Mobeetle6 BNF (FrSky / ExpressLRS)

5.00 out of 5
(4 customer reviews)

The new Mobeetle6 BNF is the lightest 65mm mass production whoop in the world, providing extreme speed and agility!


or 6 weekly interest free payments of NZD $38.33 with

SKU: 7010 Categories: ,


The new Mobeetle6 BNF is the lightest 65mm mass production whoop in the world, the DiamondF4 Flight controller and 0702 motors inspired from Angry Don FPV, not with extreme performance of this BNF with the new Diamond F4 ExpressLRS/FrSky flight controller.

Comes assembled in traditional whoop frame with low profile canopy design, and can be customised via the included toothpick frame and traditional canopy for camera angle adjustment (great to slow things down)

Brand Name: Happymodel
Item Name: Mobeetle6 whoop and toothpick 2-IN-1 FPV Racer Drone
Wheelbase: 65mm
Size: 80mm*80mm*30mm
Weight: 17.5g (without battery)


The lightest 1S Whoop and Toothpick 2-IN-1 fpv drone
Comes with tooth pick frame for convert
Powerful and efficiency
The lightest 1s AIO 5IN1 F4 flight controller
New Unibell SE0702 brushless motors with pcb wire board
Built-in OPENVTX up to 400mw
Low profile Canopy design



1x Assembled Mobeetle6 using 65mm Whoop Frame and Low-profile Canopy

2x 1s 300mah Lipo battery

1x Spare Set of Props

1x 65mm toothpick frame
1x Mobula6 canopy
1x Propeller disassemble tool

1x Screwdriver

Does NOT include a charger


Spare Parts:

HappyModel Mobula6/Mobeetle6 Spare Canopy

HappyModel Diamond F4 AIO Flight Controller

HappyModel SE0702 Motor

Gemfan 1210-2 Props

HQProp 31MM 2-Blade 



HappyModel 300Mah HV 30C Battery

GNB 380Mah HV – High Performance with Extra Flight Time



VIFLY WhoopStor V2 6 Ports 1S Storage Charger Discharger

TBS Micro 1S Battery Charger V2


Deatiled Specifications:


Model:SE0702 KV23000
Stator Diamter:7mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ9.5mm*14mm
No.of Cells(Lipo):1S only


Flight Controller

(ELRS SPI RX version)DiamondF4 ELRS FC Firmware target: CrazybeeF4SX1280
(Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)
Original whoop size compatible
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OPEN VTX
Built-in SPI ELRS V2.0/Frsky receiver
Built-in 5V 1A BEC


Onboard ESC 4in1:

MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_50_REV16_8.HEX
Default protocol: DSHOT600


Onboard 5.8g OPENVTX

Firmware version: OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)



Pitch:1 inchProps Dia:30mm
Center Hole Dia:1mm


Camera: Runcam Nano3

Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
Lens : 2.3mm(M6.5) FOV 140°
Signal System: NTSC
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: [email protected]
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V [email protected]
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm


Lipo Battery

Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 7.5gConnector: PH2.0

Additional information




Frame Size

4 reviews for HappyModel Mobeetle6 BNF (FrSky / ExpressLRS)

  1. 5 out of 5

    Simon Haines (verified owner)

  2. 5 out of 5

    Kester Roberts (verified owner)

    My first tinywhoop. I have it running on 3.1 ExpressLRS and it works a dream! Acro is quick and punchy and turning up your rates for indoor freestyle is amazing. Definitely recommend AngryDon’s youtube tips for setting up before you first fly.
    Love this Whoop!

  3. 5 out of 5

    Sam M. (verified owner)

    Great quad, super powerful and responsive

  4. 5 out of 5

    Mike Field (verified owner)

    Absolute ripper! Love this little quad, so fun for running round the house. Considering a second to set up as the toothpick version.

    Yeah the camera angle is a little steep for a beginner, but there are a heap of templates available to print new canopies, and you can always order a print from kiwiquads if you don’t have a printer 🙂

    I’ve heard the motors can be upgraded but meh I’m super happy just running the out-of-the-box setup, works just fine for me.

    Great service and rapid shipping as always.

Only logged in customers who have purchased this product may leave a review.