HappyModel Mobeetle6 BNF (FrSky / ExpressLRS)
The new Mobeetle6 BNF is the lightest 65mm mass production whoop in the world, providing extreme speed and agility!
$229.99
or 6 weekly interest free payments of NZD $38.33 with
Description
The new Mobeetle6 BNF is the lightest 65mm mass production whoop in the world, the DiamondF4 Flight controller and 0702 motors inspired from Angry Don FPV, not with extreme performance of this BNF with the new Diamond F4 ExpressLRS/FrSky flight controller.
Comes assembled in traditional whoop frame with low profile canopy design, and can be customised via the included toothpick frame and traditional canopy for camera angle adjustment (great to slow things down)
Specifications:
Brand Name: Happymodel
Item Name: Mobeetle6 whoop and toothpick 2-IN-1 FPV Racer Drone
Wheelbase: 65mm
Size: 80mm*80mm*30mm
Weight: 17.5g (without battery)
Features:
The lightest 1S Whoop and Toothpick 2-IN-1 fpv drone
Comes with tooth pick frame for convert
Powerful and efficiency
The lightest 1s AIO 5IN1 F4 flight controller
New Unibell SE0702 brushless motors with pcb wire board
Built-in OPENVTX up to 400mw
Low profile Canopy design
Includes:
1x Assembled Mobeetle6 using 65mm Whoop Frame and Low-profile Canopy
2x 1s 300mah Lipo battery
1x Spare Set of Props
1x 65mm toothpick frame
1x Mobula6 canopy
1x Propeller disassemble tool
1x Screwdriver
Does NOT include a charger
Spare Parts:
HappyModel Mobula6/Mobeetle6 Spare Canopy
HappyModel Diamond F4 AIO Flight Controller
Batteries:
HappyModel 300Mah HV 30C Battery
GNB 380Mah HV – High Performance with Extra Flight Time
Chargers:
VIFLY WhoopStor V2 6 Ports 1S Storage Charger Discharger
TBS Micro 1S Battery Charger V2
Deatiled Specifications:
Motor
Model:SE0702 KV23000
Configuration:9N12P
Stator Diamter:7mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ9.5mm*14mm
Weight(g):1.5g
No.of Cells(Lipo):1S only
Flight Controller
(ELRS SPI RX version)DiamondF4 ELRS FC Firmware target: CrazybeeF4SX1280
(Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)
Original whoop size compatible
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OPEN VTX
Built-in SPI ELRS V2.0/Frsky receiver
Built-in 5V 1A BEC
Onboard ESC 4in1:
MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_50_REV16_8.HEX
Default protocol: DSHOT600
Onboard 5.8g OPENVTX
Firmware version: OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Prop
Weight:0.19g
Material:PC
Pitch:1 inchProps Dia:30mm
Center Hole Dia:1mm
Camera: Runcam Nano3
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
Lens : 2.3mm(M6.5) FOV 140°
Signal System: NTSC
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: [email protected]
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V [email protected]
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm
Lipo Battery
Capacity:300mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 7.5gConnector: PH2.0
Additional information
Protocol | |
---|---|
Brand | |
Frame Size |
4 reviews for HappyModel Mobeetle6 BNF (FrSky / ExpressLRS)
Only logged in customers who have purchased this product may leave a review.
Related products
-
HappyModel Mobula7 1S (FrSky / ExpressLRS)
5.00 out of 5(12) $209.99In stockSelect options -
iFlight Nazgul Evoque F5D V2 DJI O3 BNF ExpressLRS incl GPS
5.00 out of 5(4) $1,159.99In stockAdd to cart -
iFlight Nazgul Evoque F5X V2 DJI O3 Air Unit PNP
$1,109.99Out of stockSelect options -
iFlight ProTek R25 DJI HD BNF ExpressLRS
$579.99Out of stockRead more -
iFlight Nazgul Evoque 6″ F6X/F6D DJI HD 6S PNP
5.00 out of 5(1) $869.99In stockSelect options -
iFlight Nazgul Evoque F5X V2 DJI O3 Air Unit BNF ExpressLRS
$1,129.99Out of stockRead more
Explore more from HappyModel
-
HappyModel Mobula6 2024 Frame (Grey/Clear)
$8.99Out of stockSelect options -
HappyModel FX17-B FPV Nano Camera
$33.99Out of stockRead more -
HappyModel VTx 5.8Ghz Dipole Antenna for Mobula6 2 Pieces
$4.99Out of stockRead more -
HappyModel Mobula6 ECO 2024 HDZero ELRS
$299.99Out of stockRead more -
HappyModel Mobula6 2024 Camera mount bracket
$6.99Out of stockRead more -
HappyModel SE0702 KV28000 for Mobula6 2024
$16.99Out of stockRead more
Other Analog FPV BNF Drones you might like
-
HappyModel Mobula7 1S HD 1080P (FrSky / ExpressLRS)
4.67 out of 5(3) $299.99Out of stockSelect options -
AOS 5R V5 Analog 5″ Racing Drone BNF ExpressLRS
$699.99In stockAdd to cart -
GepRC Cinebot30 Analog FPV Drone 6S BNF ExpressLRS
$499.99Out of stockRead more -
HappyModel Mobula7 1S (FrSky / ExpressLRS)
5.00 out of 5(12) $209.99In stockSelect options -
EMAX TinyHawk III Plus Freestyle HDZero BNF ExpressLRS
5.00 out of 5(1) $469.99In stockAdd to cart -
iFlight Protek35 V1.4 3.5″ 6S CineWhoop BNF ExpressLRS
5.00 out of 5(1) $519.99In stockAdd to cart
Other BNF/PNP Drones you might like
-
BetaFPV Pavo25 Analog Cinewhoop BNF ExpressLRS
5.00 out of 5(1) $399.99Out of stockRead more -
HappyModel Mobula8 Digital Whoop DJI O3 Lite – ExpressLRS
4.50 out of 5(2) $189.99In stockAdd to cart -
HappyModel Mobula7 1S HD 1080P (FrSky / ExpressLRS)
4.67 out of 5(3) $299.99Out of stockSelect options -
BetaFPV Pavo Pico Brushless Whoop DJI/Walksnail (3 Options)
5.00 out of 5(3) $184.99 – $249.99Out of stockSelect options -
iFlight Nazgul Evoque 6″ F6X/F6D DJI HD 6S PNP
5.00 out of 5(1) $869.99In stockSelect options -
Flywoo FlyLens 85 HD O3 Lite 2S Whoop ExpressLRS
5.00 out of 5(2) $869.99In stockAdd to cart
Simon Haines (verified owner) –
Kester Roberts (verified owner) –
My first tinywhoop. I have it running on 3.1 ExpressLRS and it works a dream! Acro is quick and punchy and turning up your rates for indoor freestyle is amazing. Definitely recommend AngryDon’s youtube tips for setting up before you first fly.
Love this Whoop!
Sam M. (verified owner) –
Great quad, super powerful and responsive
Mike Field (verified owner) –
Absolute ripper! Love this little quad, so fun for running round the house. Considering a second to set up as the toothpick version.
Yeah the camera angle is a little steep for a beginner, but there are a heap of templates available to print new canopies, and you can always order a print from kiwiquads if you don’t have a printer 🙂
I’ve heard the motors can be upgraded but meh I’m super happy just running the out-of-the-box setup, works just fine for me.
Great service and rapid shipping as always.