BetaFPV Pavo Pico Brushless Whoop DJI/Walksnail (3 Options)

Description

This ultra-light cinewhoop with a small wheelbase is not only equipped with 45mm propellers but the latest F4 1S 12A AIO Brushless FC V3 which greatly heightens the flying experience. Due to Its split design HD VTX mounting bracket, it supports quick installation of mainstream HD digital VTX modules and a rubber damper vibration-damping design with GyroFlow stabilization software ensures stable and smooth HD images. Its design is well-suited for cruising indoors and outdoors alike.

KiwiQuads stocking options for:

• DJI O3 with ExpressLRS 2.4Ghz
• DJI O3 with TBS Crossfire Rx
• Suits DJI Caddx Vista and Walksnail Avatar with ExpressLRS 2.4Ghz
• Please contact us if you’d like us to install [email protected]

Please note ALL Options EXCLUDE Camera and VTX kit.

Features:

• The split-design HD VTX mounting bracket is compatible with popular models like DJI O3 Air Unit, Walksnail Avatar HD Pro, and Caddx Vista. The side bracket, rubber damper vibration-damping design, lens holder, and antenna have all been reinforced to suppress low-frequency vibration and enhance the safety of HD VTX, ensuring a stable output of high-definition videos. And simply connect the VTX cable and complete the binding process to start flying.
• To safeguard the DJI O3 camera lens and maintain consistent high-definition video output during flight, both a lens filter and a lens protection mount are included.
• The battery slot and HD VTX mounting bracket duct height have been reduced to enhance the overall flying experience. DIY battery fixing methods are also supported, making them compatible with batteries of varying sizes and capacities.
• The newly developed F4 1S 12A AIO Brushless FC V3 weighs only 4.2 grams and is optimized for HD digital VTX. Its improved computing power, high response speed, and stable flight make it an ideal choice for HD whoops.
• The frame is constructed using PA12 material, known for its exceptional impact resistance and effortless installation process

Specifications:

• Items: Pavo Pico Brushless Whoop Quadcopter
• Color: Black
• Flight Time*: 4min
• Wheelbase: 80.8mm
• FC: F4 1S 12A AIO Brushless FC V3 (STM32F405 MCU Version)
• Battery: 2S 450mAh 45C
• Props: GF 45mm-3B black propeller
• Motor: 1102 | 14000kv red and black (2022)
• Weight (No Battery): 71.2g (DJI O3), 66.02g (Vista), 65.88g (Avatar)
• Frame: Pavo Pico Brushless Whoop Frame
• HD VTX: Support DJI O3 Air Unit, Caddx Vista Kit / RUNCAM Link / Walksnail Avatar HD Pro Kit installation.
• RX Version: Serial ELRS/TBS
• FPV Camera: Support DJI O3 Camera, Caddx Series, RUNCAM Series 19mm/20mm Camera, Avatar HD Pro Camera

DJI O3 Vibration:

To tackle the challenge of vibration on many whoop drones, the DJI O3 unit is mounted on a carbon fiber plate with 4 rubber dampers. This innovative design ensures peak performance and perfect stability.

Troubleshooting:
To improve video quality when recording with DJI O3 HD VTX, turn off its electronic stabilization and use GyroFlow stabilization software.
When fixing the HD VTX bracket with M1.4*10 screws, ensure that the nut just touches the shock-absorbing ball.
The Jello effect may occur during the above installation due to 2 reasons:
The VTX bracket is over-tightened with the screw and the rubber dumper is totally deformed. To solve this, make sure that the screw is tightened just enough to touch the shock-absorbing ball and keep the ball and bracket loose.
If It is a large deformation of the frame or quadcopter blades, replace the frame or blades with larger vibrations if necessary.
Note: use acetate tape to bind motor wires and prevent them from drooping and interfering with the propeller’s rotation.

Included Parts:

• 1 * Pavo Pico Brushless Whoop Quadcopter (Without HD Digital VTX & Camera)
• 1 * 2S 450mAh Battery
• 4 * GF 45mm-3B Propellers
• 1 * USB Parameter Adjustment Cable
• 1 * 5.8G Copper Tube Antenna Package
• 1 * VTX Bracket Screw Package
• 2 * DJI O3 HD Digital VTX Antenna Mount
• 2 * DJI O3 HD Digital VTX Mounting Bracket
• 1 * VTX Mounting Plate (Vista/Avatar HD Digital VTX Version Only)
• 1 * DJI O3 Lens UV Protector (DJI O3 HD Digital VTX Version Only)
• 1 * DJI O3 Lens Protective Case (DJI O3 HD Digital VTX Version Only)

Note: 1. The package picture above is the DJI O3 HD digital VTX version. 2. DJI O3 HD Digital VTX, Avatar HD Digital VTX, and Vista HD Digital VTX are not included in all packages. You need to buy it yourself.

Spares (Not Included):

Frame: BetaFPV Pavo Pico Brushless Whoop Frame
Motors: BetaFPV 1102 Brushless Motors (14000Kv/22000Kv)
Props: Gemfan 45mm 3-Blade Micro Whoop Props 1.5mm Shaft (3 Colours)
FC AIO: BetaFPV F405 1S 12A AIO Brushless FC V3 Serial ELRS 2.4G

Reccomended Batteries:

Standard: GNB Battery 7.6V HV 450mAh 2S
Larger: GNB LiPo Battery 7.6V 100C 550mAh 2S HV