“AOS 5R V5 Analog 5″ Racing Drone BNF ExpressLRS” has been added to your cart. View cart

HappyModel M8 Freestyle HDZero Mobula8 Micro FPV Drone - 2

HappyModel M8 Freestyle HDZero Mobula8 Micro FPV Drone - 5

HappyModel M8 Freestyle HDZero Mobula8 Micro FPV Drone - 3

HappyModel M8 Freestyle HDZero Mobula8 Micro FPV Drone - 1

HappyModel M8 Freestyle HDZero Mobula8 Micro FPV Drone

Name: HappyModel M8 Freestyle HDZero Mobula8 Micro FPV Drone
SKU: 100918
Availability: OutOfStock

by HappyModel

Freestyle with power, speed, and clarity—smooth digital FPV in a lightweight 80mm drone built to thrill.

$424.99

Stock coming soon!

Categories: BNF/PNP Drones, Micro BNF Drones

Description

The HappyModel M8 Freestyle HDZero Mobula8 Micro FPV Drone delivers HD digital clarity and powerful freestyle performance in a compact 80mm frame. Featuring the cutting-edge HDZero AIO15 5-IN-1 flight controller, RS1102 KV13500 motors, and 45mm HQProp propellers, it’s built for buttery-smooth flights and precise control. Weighing just 33.5g and optimized for 2S batteries, it’s your ultimate backyard flyer for agile freestyle and immersive FPV adventures.

Features

Equipment with the New HDZERO AIO15 5-IN-1 flight controller
2S battery support Powerful and Smooth freestyle flying experience
UART ExpressLRS receiver support stable control link
Lighter but powerful for backyard FPV
HDZERO lighter and good quality Camera

Specifications

Wheelbase: 80mm
Weight: 33.5g (without battery)
Motors: RS1102 KV13500 brushless motors
Propellers: HQProp 45mm
Flight Controller: HDZero AIO15 5-IN-1 (2S support)
Receiver: 2.4GHz ExpressLRS (UART)
Video System: HDZero digital FPV camera
Battery Compatibility: 2S (recommended 550mAh, not included)
Frame Type: Whoop-style micro freestyle frame
Control Range: Stable long-range link via ExpressLRS

Package Includes

1 x Happymodel M80 Frame
1 x HDZERO AIO15 5-IN-1 Flight Controller
4 x RS1102 KV13500 Brushless Motor
1 x HQPROP 45MMx3 Tri-Blade Propellers (4CW + 4CCW)
1 x HDZERO LUX Camera
1 x Canopy
1 x Screwdriver

Spare Parts Specifications

Motor	Mode: RS1102 KV13500 Configu-ration:9N12P Stator Diamter:11mm Stator Length:2mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.Len):Φ13.5mm14mm Weight(g):2.8g No.of Cells(Lipo):1-2S
Propellers	Weight:0.33g Material: Poly Carbonate Pitch:0.9 Props Dia:45mm Hub Thickness:5mm Shaft:1.5mm
Flight controller	MCU: STM32G473 (170MHz, 512K Flash) Gyro: ICM42688 On board voltage and amperage meters Built-in 15A(each) Blue Jay 4-in-1 ESC Built-in 5.8G HDZero VTX RF output: 25mw/200mW Supported channels: R1-R8, F2/F4, L1-L8 UFL connector (ultra-lite linear antenna included) Built-in Serial ExpressLRS 2.4GHz receiver Built-in 5V 3A BEC Flight controller firmware target: HDZERO_AIO15 Power supply: 2S battery (6.4v~8.7v) Fully compatible with the popular whoop frames Board size:31.3×31.3mm with a 25.5×25.5 mounting hole size Weight:7.2g (with motor plugs)
Onboard 4in1 ESC	Power supply: 2S LiPo/LiPo HV Current: 15A continuous,18A peak (3 seconds) Support BLHeli_S Bluejay firmware Factory firmware: Bluejay ESC V0.19.2Firmware target: Z-H-30 48KHz Default protocol: DSHOT300
Onboard UART ExpressLRS 2.4GHz Receiver	Packet Rate option: 50/100/150/250/333/500/D250/D500/F500/F1000Hz RF Frequency: 2.4GHz Antenna: Pre-soldered enameled copper wire 31mm length Telemetry output Power: <12dBm
LUX camera	HDZero Lux Camera Sensor size: 1/2 inch Resolution: 720p60 4:3 and 16:9 FOV: D:155° H:126° V:94°(4:3) FOV: D:145° H:126° V:70°(16:9) WDR