TBS Tango 2 – Module Bay Add-on
Add a XJT Module to your Tango 2 with this comprehensive DIY kit. Aftermarket mod to add a module bay to your Tango 2. Sticks to the back of your Tango 2 and plugs into the receptacle board of your Tango 2.
$15.99
or 6 weekly interest free payments of NZD $2.66 with
Out of stock
Receive in-stock notifications for this.
Description
*IMPORTANT NOTE
We have discovered that XJT mini modules are using a pin that we did not anticipate for use in our module bay. It appears that the XJT mini module is the only module on the market that uses this pin.
Due to a hardware incompatibility between the XJT mini module and the Tango 2 (V2 and up) boards, the Tango 2 will NOT be able to support the XJT mini module.
After-market mod to add a module bay to your Tango 2. Sticks to the back of your Tango 2 and plugs into the receptacle board of your Tango 2.
INSTALLATION
- Install the FPC cable to the PCB.
With the blue side facing up, lift the lock and slide the cable in then lock it down. - Feed the cable through the bottom and place the PCB to the module bay.
- Turn the module bay around to make sure everything fits accordingly.
- Close the case with the 2 screws provided
- Use a Dremel, knife or solder tip to cut a small hole according to the outline.
- Slide the flex PCB through the drilled case.
- Clean the back surface and tape the Tango 2 module bay down
- Â Install the FPC cable into the receptacle.
- Close the Tango2 case, and you’re done!
Warning:Â The batch 1 of Tango 2 shipped without module bay capability. Please verify that there is a connector (in pictures above) before purchasing this add-on. Upgrade PCB’s are available!
Also, whenever opening up your Tango 2 in future, you will need to open the module bay and release the flex PCB from the socket.
SPECIFICATIONS:
- “LITE” style module bay add-on for Tango 2
- Compatible with TBS Tango 2 mainboard “V006H” and up
Additional information
Brand |
---|
3 reviews for TBS Tango 2 – Module Bay Add-on
Only logged in customers who have purchased this product may leave a review.
Related products
-
TBS Mambo – U.FL to RP-SMA Adapter
5.00 out of 5(3) $5.99In stockAdd to cart -
TBS Diamond Antenna for TBS Crossfire
4.82 out of 5(11) $44.99In stockAdd to cart -
TBS Tango 2 Neck Strap Mount
5.00 out of 5(4) $9.49In stockAdd to cart -
GNB Battery 7.4V 3000mAh 2S for Radiomaster TX12 Radio
5.00 out of 5(9) $27.99Out of stockRead more -
Radiomaster – AG01 CNC Hall Gimbals for TX16S (Pair)
5.00 out of 5(3) $249.99In stockAdd to cart -
Sale!
BETAFPV ExpressLRS 915MHz Nano Tx Module
3.00 out of 5(1)$74.99Original price was: $74.99.$35.99Current price is: $35.99.In stockAdd to cart
Explore more from Team BlackSheep
-
New!
TBS M10Q GPS Glonass Module
$37.99In stockAdd to cart -
TBS Source One V5 7 inch Arm Set
3.00 out of 5(2) $37.99In stockAdd to cart -
Sale!
TBS Tracer/Crossfire Nano TX internals to the Micro Kit
5.00 out of 5(1)$8.99Original price was: $8.99.$4.99Current price is: $4.99.In stockAdd to cart -
TBS Source One V4 5″ Frame Parts (5 Options)
$3.99 – $14.99In stockSelect options -
SWAGGER Straps Slim Unbreakable 260mm (2 Pieces)
5.00 out of 5(3) $12.99In stockAdd to cart -
SWAGGER Straps Unbreakable 280mm (2 Pieces)
5.00 out of 5(6) $12.99In stockAdd to cart
Other Radio Accessories you might like
-
Ethix TX Neck Strap V2
4.90 out of 5(31) $13.99In stockAdd to cart -
Happymodel 80mm 2.4GHz Antenna for ExpressLRS TX module SMA
5.00 out of 5(2) $9.99In stockAdd to cart -
RadioMaster Carry Case for Zorro
5.00 out of 5(5) $35.99Out of stockRead more -
Radiomaster – Red AG01 CNC Hall Gimbals for TX16S (Pair)
$269.99In stockAdd to cart -
EMAX Transmitter Neck Strap for RC Radio
4.60 out of 5(5) $8.99In stockAdd to cart -
RadioMaster TX16s Screen protector – 2 Pieces
5.00 out of 5(3) $9.99Out of stockRead more
Kerry Millar (verified owner) –
George Jordan (verified owner) –
Sam Lee (verified owner) –