Electronics>Electronic Accessories

Mateksys Voltage Spikes Filter for XT60 – 5 pack

5.00 out of 5
(8 customer reviews)

A convenient design for capacitor on your XT60 lead, pefect to absorb voltage surges and ripples

$11.99

or 6 weekly interest free payments of NZD $1.99 with

In Stock at KiwiQuads

Ships from our Tauranga warehouse

Description

A convenient design for capacitor on your XT60 lead, pefect to absorb voltage surges and ripples

  • 2x high-power TVS diodes and 1x 470uF low ESR capacitor on board
  • TVS can absorb huge voltage surge at the moment of plugging battery to protect the connected components.
  • Low ESR capacitor will reduce the voltage spikes and ripple caused by ESC.
  • Maximum Operating Voltage: 28V (6S LiPo)
  • Packing: 5x PCB w/TVS,  5x 470uF Rubycon ZLH series electrolytic capacitor.

What is a TVS Diode and How Does it Work?

  • The Transient Voltage Suppression diode (TVS) is a component that is commonly used for transient protection. (Not to be confused with zener diode or schottky diode.) It consists of a p-n semiconductor junction that becomes conductive during a transient voltage spike. In normal circumstances, it appears as an open circuit despite a small leakage current.
  • When the voltage on the transient voltage suppressor rises across its threshold voltage(Breakdown Voltage), the avalanche effect of the semiconductor causes the p-n junction to become a low-impedance path that channels away the excessive current. The response time of the TVS diode is extremely fast, often expressed in picoseconds.
  • The placement of the TVS diode is also important. It is a good practice to place TVS diodes as close to the power source as possible.

Additional information

Brand

8 reviews for Mateksys Voltage Spikes Filter for XT60 – 5 pack

  1. 5 out of 5

    Nathan C. (verified owner)

  2. 5 out of 5

    George Jordan (verified owner)

  3. 5 out of 5

    George Jordan (verified owner)

  4. 5 out of 5

    George Jordan (verified owner)

  5. 5 out of 5

    Jack (verified owner)

    Good wee cap holders

  6. 5 out of 5

    Youfu Ma (verified owner)

    Nice to have peace of mind that the battery won’t fry the electronics

  7. 5 out of 5

    Cristian L. (verified owner)

  8. 5 out of 5

    Nathan C. (verified owner)

    A good option for mounting a cap on a battery lead where there isn’t enough room in the frame (particularly race frames)

Only logged in customers who have purchased this product may leave a review.