iFlight x 2Raw Cinematic Afterburner 5″ BNF ExpressLRS incl GPS

Description

Elevate your cinematography with the iFlight x 2RAW Afterburner 5 – a BNF ExpressLRS incl GPS masterpiece, precision-engineered for pro pilots seeking unparalleled aerodynamics and balance in every cinematic flight.

Highlight:

• Smallest Footprint
  Afterburner has a 20% smaller footprint than traditional 5inch freestyle frames, this allows for easier transportation as well as increased agility and less drag – meaning better all round performance.
• Aero Shell
  The aeroshell controls the airflow around the body and within the drone. As the speed of the drone increases the aero shell acts as an air divider, preventing air from hitting the flat top plate. The shell also helps to shield the electronics from dirt and moisture so you can have more confidence in critical situations.
• Advanced Truss Arms
  The star design combined with the trusses ensures great stiffness while keeping the weight down, and perfect balance, delivering exceptional results when it comes to filming with buttery footage.
• Bottom Mount Battery
  Inspired from FPV racers, we took a bottom mount battery approach, this allows the battery to cause minimal drag possible and completely clears the top of the drone to allow for the Gopro mounting as well as clear line of sight for the GPS. Afterburner was built for the cinema pilot! The central battery also allows the CG to remain close to the middle of the body allowing for improved agility in the air.
• No Prop in view with Gopro
  In 16:9 the GoPro has no props in the view from 5 degrees all the way to 60 degrees.
• DJI O3 HD Air Unit Low-Latency Digital Transmission
  Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI)
• 4K Stabilized Video with 155° Ultra-Wide Angle
  Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI)

Specifications:

• Product Name: Afterburner 5 O3 6S HD
• FC: BLITZ F7 Flight Controller
• ESC: BLITZ E55 4-IN-1 2-6S 55A ESC
• Video Transmission: DJI O3 Air Unit
• Geometry: X-Frame
• Frame: 210 mm wheelbase
• Motor: XING2 2207 1750KV motors
• Prop: GEMFAN 5.1X3.6X3 propellers
• Weight: 472±7g (Without Battery)
• Dimensions (L×W×H)：148x148x64mm
• Max Speed: 160km/h
• Maximum Takeoff Altitude: 7000 m
• Max Hover Time: Approx. 11mins with 6S Lipo 1400mAh battery W/O Load
• Operating Temperature Range: -10° to 40° C
• Antennas: Single Antennas
• GNSS: GPS+SBAS+Galileo+QZSS+Glonass

Important:

• All iFlight BNFs are tested before shipment to guarantee the highest quality.
• The afterburner ships with Betaflight 4.5 RC2, this version currently prevents passthrough to BLheli32. This means you will not be able to access you Blheli32 settings without flashing a different firmware. This is not a problem as you do not need to access these settings as the drone comes fully setup.
• If you still encounter a problem after receiving your shipment, please immediately contact KiwiQuads or iFlight customer support at [email protected] or www.iflightrc.freshdesk.com

Reccomended Batteries:

• Value lightweight Pack: CNHL 6S 100C 1100mAh
• Our most popular lipo: CNHL 6S 100C 1300mAh
• Premium Lipo: GNB Battery 22.2V 120C 1300mAh 6S
• Premium Lightweight Lipo: GNB Battery 22.8V 120C 1300mAh 6S HV
• Super Premium Lipo: Tattu R-Line Version 5.0 22.2V 150C 1200mAh 6S Battery
• Super Premium LIpo: Tattu R-Line Version 5.0 22.2V 150C 1400mAh 6S Battery

Spares:

• Props OEM: iFlight Nazgul F5 Propellers (4 Colours)
• Props Alternate: HQProp Ethix P3.5 RAD Berry 5.1×3.5×3 Propeller (Set of 4)