iFlight Chimera7 Pro V2 DJI O3 Air Unit PNP

Description

Chimera7 Pro V2 6S LR w/ DJI O3 Air Unit HD System – Plug-and-Play (PNP) just choose your receiver

The KING of Long Range FPV! Another breakthrough in FPV visuals from DJI with our upgraded frame and electronics. A super-efficient iFlight 7.5inch Long-Range bird that can go where you couldn’t go before and can carry bigger batteries to get the flight time to surf the swiss alps if you want! A super stiff frame for minimum resonance and XING2 2809 motors for maximum 7.5inch prop control. Fly big batteries top-mounted, or even bigger batteries bottom-mounted, 6cells recommended or 5cells for slow cruising. But whatever style you fly, a Lipo or Lion pack will just do the job. Recommended 5S 3.000mAh above (slow cruising) or our new 6S 3300mAh battery.

KiwiQuads also stocks a Bind-and-Fly (BNF) ExpressLRS version: iFlight Chimera7 Pro V2 6S LR w/ DJI O3 Air Unit HD System – BNF – ExpressLRS

Features:

Smooth and Powerful XING2 Motors

The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection.

Latest Nazgul Frame for Maximum Protection

The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts.

DJI O3 HD Air Unit Low-Latency Digital Transmission 

Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI)

4K Stabilized Video with 155° Ultra-Wide Angle

Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI)

Secured Battery Plug with Anti-Spark Filter

Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage.

Specially Designed Heatsink for DJI O3 HD Air Unit

Improved cooling performance for the high power draw of the DJI O3 video transmitter. We’ve added a custom CNC heatsink for excellent heat dissipation without overheating, even on high power levels.

GPS Pre-Installed for More Safety at A Distance

GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behavior)

Specifications:

• Product Name: Chimera7 Pro V2 6S HD
• FC: BLITZ F722 Flight Controller
• ESC: BLITZ E55 4-IN-1 2-6S 55A ESC
• Video Transmission: DJI O3 Air Unit
• Frame: 345mm wheelbase
• Motor: XING2 2809 motors
• Prop: 7.5X3.7X3 propellers
• Weight：695grams
• Model：Chimera7 Pro
• Takeoff Weight：Approx. 750g
• Dimensions (L×W×H)：
• Diagonal Distance：120 mm
• Max Ascent Speed：6 m/s (Normal Mode, Sport Mode)
• Max Descent Speed：6 m/s (Normal Mode, Sport Mode)
• Max Speed：27 m/s (Manual Mode)
• Maximum Takeoff Altitude：7000 m
• Max Hover Time：Approx. 30 mins
• Max Flight Distance：18 km
• Max Wind Speed Resistance：130 Km/H (Level 5)
• Operating Temperature Range：-10° to 40° C (14° to 104° F)
• Transmission Power (EIRP)：FCC: < 33 dBm / CE: < 14 dBm / SRRC: < 30 dBm
• Antennas：Dual Antennas
• GNSS：GPS + Galileo

ELECTRONICS

FC //BLITZ F722 Flight Controller

• Firmware target: IFLIGHT_BLITZ_F722
• Barometer: DPS310
• LED controller: Yes
• MCU: STM32 F722
• Beeper pad: Yes
• Gyro: BMI270

ESC // BLITZ E55 4-IN-1 2-6S 55A ESC

• Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
• Target:   IFLIGHT_BLITZ_G2
• Supports 2-6S Lipo input
• Current sensor: Yes
• Constant: 55 Amps
• Current rate: 200
• Burst: 65 Amps
• MCU： G071

• Product Name：DJI O3 Air Unit
• Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX)
• Communication Bandwidth： Max 40 MHz
• Live View Quality and Latency
• With DJI FPV Goggles V2:
• 810p/120fps Video Transmission Quality: The video transmission latency is lower than 28 ms.
• 810p/60fps Video Transmission Quality: The video transmission latency is lower than 40 ms.
• With DJI Goggles 2:
• 1080p/100fps Video Transmission Quality: The video transmission latency is as low as 30 ms.
• 1080p/60fps Video Transmission Quality: The video transmission latency is as low as 40 ms.
• Max Video Transmission Bitrate：50 Mbps
• Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)Audio Transmission：N/A

1 x Chimera7 Pro V2 6S DJI O3 Air Unit Included Components and Parts

• 1 x Chimera7 Pro V2 6S DJI O3 Air Unit
• 1 x Battery pad
• 2 x HQ 7.5X3.7X3 CW propeller + 2 x  HQ 7.5X3.7X3 CCW (Color may vary)
• 2 x Battery strap
• 1 x Screw bag

Reccomended Batteries:

General Flying: GNB 6s 2600mah

Long Range (lipo): GNB Battery 22.2V 100C 3000mAh 6S

Long Range (li-ion): Auline Li-Ion Battery 6S 22.2V 3000mAh VTC6

Spares:

Props: HQProp DP 7.5X3.7X3 Light Grey (Set of 4)

Note:

All iFlight BNFs are tested before shipment to guarantee the highest quality.

If you still encounter a problem after receiving your shipment, please immediately contact KiwiQuads or iFlight customer support at [email protected] or www.iflightrc.freshdesk.com