Electronics>Flight Controllers>30mm Flight Controllers

Diatone MAMBA Basic F405 MK3 Flight Controller M3/30MM

5.00 out of 5
(1 customer review)

Diatone’s MAMBA Basic series electronics are low-cost, yet highly feature and are perfect for your next FPV build.


or 6 weekly interest free payments of NZD $15.83 with

In Stock at KiwiQuads

Ships from our Tauranga warehouse
SKU: 2394 Category:


MAMBA Basic F405 MK3

Diagram Link From Help Centre Link


  • Add I2C function
  • When you connect the USB, the receiver and OSD settings can be saved
  • Increase the pad area
  • LED signal selection (when Mamba Led sys available)
  • BEC short circuit protection
  • TVS instant high voltage protection 30V


  • Upgrade the anti-interference cable
  • Use Typec(Most)
  • The pad area of the Mini flight controller (20×20) increased by 140%


  • Add self-recovery insurance to the receiver’s 5V power supply.
  • Increase the camera VCC power supply pad.
  • The standard flight controller (30.5×30.5) adds a spare pad.
  • Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.


Mamba Basic F405 MK3 FC

MCU: 168MHz STM32F405RGT6

IMU: MPU6000
Barometer: Yes
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 6Set
ESC Soft: Dshot300/600/1200
ESC Telemetry: Yes
Power Led: Yes
LED Controller: BF LED/MB LED 4 Set 2812 LED
F.Port: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A&  5V 3A  (System Power))&                           
5V 3A(LED )& 9V 3A
MOUNTING: 30.5mm,M3

Additional information


1 review for Diatone MAMBA Basic F405 MK3 Flight Controller M3/30MM

  1. 5 out of 5

    Sam Cameron (verified owner)

    As advertized

Only logged in customers who have purchased this product may leave a review.