View cart “ToolkitRC MC8 Multi-Functional 2-8S Battery Checker and Balancer” has been added to your cart.
BetaFPV BT2.0 Connectors (5 Male & 5 Female)
by BetaFPV
5.00 out of 5
(7 customer reviews)
$10.99
or 6 weekly interest free payments of NZD $1.83 with
Hurry! Only 2 left in stock
Ships from our Tauranga warehouse
SKU: 1825
Categories: Battery Accessories, Adapters & Connectors
Description
BT2.0 Connector – the most significant revolution in 1S Tiny Whoop Drone.
Not sure if it’s worth switching to BT2.0? Check more from Joshua Bardwell‘video- Proof that the BT2.0 connector is better than PH 2.0.
- BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to banana connector and increasing the cross-sectional area of banana connector.
- With these connectors, it can support 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current.
- By solving the problem of voltage sag, the discharge of the 300mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning.
- Compared with the PH2.0 crimped pins, BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power. You can get 2mins flight time in full throttle on Meteor65 if you use our BT2.0 300mah 1S Battery.
SPECIFICATION
- Size: Male Connector – 6.0*4.2*10.5mm / Female Connector – 6.0*4.2*8.3mm
- Weight: Male Connector- 0.34g/PCS / Female Connector – 0.24g/PCS
- Note: The terminal molded case identifies the positive and negative poles, and must be welded according to the instructions.
PACKAGE
- 5* BT2.0 Female Connector & 5 * BT2.0 Male Connector
7 reviews for BetaFPV BT2.0 Connectors (5 Male & 5 Female)
Only logged in customers who have purchased this product may leave a review.
Related products
-
1-8S Lipo Battery Voltage Tester / Low Voltage Buzzer Alarm
4.78 out of 5(23) $7.99In stockAdd to cart -
Ethix XT30 Rubber (20pcs)
5.00 out of 5(3) $14.99In stockAdd to cart -
BETAFPV BT2.0 1S Whoop Cable Pigtail (6 Pcs)
5.00 out of 5(7) $12.99In stockAdd to cart -
Ethix Power Straps 230 (4PCS)
4.54 out of 5(13) $10.99In stockAdd to cart -
2S Parallel Charging Board w/ JST-PH2.0 Connectors
4.80 out of 5(5) $8.99Out of stockRead more -
Amass Deans T-Plug Connector Pair /w Protection Covers
4.67 out of 5(3) $2.99In stockAdd to cart
Explore more from BetaFPV
-
BetaFPV Pavo25 V2 Drone – BNF ExpressLRS (No VTx)
$399.99Out of stockRead more -
BetaFPV 1506-4200KV Brushless Motors (1PCS)
$32.99Out of stockRead more -
BetaFPV BT2.0 LAVA 550mAh 1S 75C HV Battery
$16.99In stockAdd to cart -
BetaFPV BT2.0 LAVA 450mAh 1S 75C HV Battery
5.00 out of 5(1) $14.99In stockAdd to cart -
BetaFPV BT2.0 LAVA 300mAh 1S 75C HV Battery
$10.99In stockAdd to cart -
BetaFPV Pavo25 V2 Whoop Frame
$74.99Out of stockRead more
Other Battery Accessories you might like
-
ToolkitRC MC8 Multi-Functional 2-8S Battery Checker and Balancer
5.00 out of 5(2) $69.99In stockAdd to cart -
JST Pigtails Male/Female Pair 100mm
$3.99In stockAdd to cart -
Mateksys Micro BEC 12S/60V Input to 5V/9V/12V
4.50 out of 5(2) $14.99In stockAdd to cart -
iFlight Anti Spark Filter for XT60 connector (2 Sizes)
5.00 out of 5(2) $28.99In stockSelect options -
XT60 Banana Plug for Charging 15cm
5.00 out of 5(24) $3.99Out of stockRead more -
1-8S Lipo Battery Voltage Tester / Low Voltage Buzzer Alarm
4.78 out of 5(23) $7.99In stockAdd to cart
Other Adapters & Connectors you might like
-
EMAX 1S PH2.0 to GNB27 Charging Adapter
5.00 out of 5(2) $3.99Out of stockRead more -
JST-XH 10cm Balance Lead Extension Cable 22AWG (5 Options)
5.00 out of 5(21) $1.79 – $2.99In stockSelect options -
Flywoo Flywoo UNICON UPL Capacitor 35V 220UF with PCB (5PCS)
$24.99In stockAdd to cart -
ToolkitRC Aligator Clip to XT60 (Female) for Charger
5.00 out of 5(2) $7.99In stockAdd to cart -
AMASS EC2 Gold Connectors (3 Pairs)
$8.99In stockAdd to cart -
Silicone Wire 18/22/26/30 AWG (Yellow) – Per Metre
4.95 out of 5(20) $0.49 – $1.99In stockSelect options
Marc C. (verified owner) –
Connectors seem solid – will replace my PH2 connectors with these
Kerry H. (verified owner) –
Cheers lads
Fintan Creagh (verified owner) –
look good, will hopefully have better performance
Fintan Creagh (verified owner) –
makes a huge difference compared to ph2.0
be careful with iron temp because the pins can slip out at high temps
Terry C. (verified owner) –
Anonymous (verified owner) –
Buddy M. (verified owner) –