Motors

ETHIX Mr Steele Stout Motor V4 – 2306 1750Kv

5.00 out of 5
(2 customer reviews)

The wait is over!

I would like to Introduce the Mr. Steele V4 STOUT 2306 (1750KV) 6S FPV freestyle motor.

I take great pride in my work and am always trying to raise the bar. After two years of seemingly nonstop research & development, I am proud to present this fine piece of Miniquad motor engineering.

$43.99

Hurry! Only 1 left in stock

Ships from our Tauranga warehouse
SKU: 2296 Category:

Description

The wait is over!

I would like to Introduce the Mr. Steele V4 STOUT 2306 (1750KV) 6S FPV freestyle motor.

I take great pride in my work and am always trying to raise the bar. After two years of seemingly nonstop research & development, I am proud to present this fine piece of Miniquad motor engineering.

V4 MOTOR HIGHLIGHTS/CHANGES

  • base redesign 16×16(only) mounting holes (structural changes for more durability)
  • Complete bell redesigned (durability and smoothness in mind)
  • Thicker single strand copper winding
  • increased EFFICIENCY & POWER
  • Complete Interchangeable motor pants redesign (thicker & more crash/low temperature resistant, better gap fitment, + more protection coverage for the “tall pants”)
  • better assembly tolerances
  • Overall QC improvements
  • 9mm steel bearings
  • Eco-Friendly packaging
  • Motor weight 31.8g
  • (full-length cables) compared to Stout V3 at 30.5g

PANTS WEIGHTS

  • Low – 1g vs (0.8 v3)
  • Tall – 2g vs (1.8 v3)

All in all this motor is an absolute gem only increasing the weight by a tad over 1g from the previous model while achieving more power, efficiency, and most importantly durability.

V3- V4 COMPATIBILITY

  • V4 and V3 motors are completely cross-compatible.
  • V3 bells – V4 stator
  • V4 bells – V3 stator

( everything is interchangeable except pants) The pants are stator-specific and can be interchangeable but with less than desired effect.

Enjoy & Thank you for your continued support.

-Steele

SPECIFICATIONS

  • Stator Size (Diameter): 23mm*6mm
  • Kv: 1750kv
  • Magnets: N52SH Curved
  • Windings: 15turn DLRK
  • Shaft Length (mm): 11.5mm
  • Shaft Diameter (mm): 4mm
  • Shaft material: Steel
  • Bearing : NMB684
  • Weight (With Wires) (g): 32.4g
  • Cells (Lipo): 6S
  • Max Current (A): 45A
  • Max Burst Current (A): 50A
  • Internal Resistance (Rm): 100mΩ
  • Wire Spec (AWG): 20#-135mm
  • Base Mounting Pattern: 16x16mm
  • Base Mounting Thread: M3 Thread
  • Motor Overall Dimensions: φ28.6mm*17.5mm

INCLUDES

  • 1 x Motor
  • 1 x Tall Motor Pants
  • 1 x Short Motor Pants
  • 4 x motor screws

Additional information

Brand

Motor Size

KV Rating

1750Kv

2 reviews for ETHIX Mr Steele Stout Motor V4 – 2306 1750Kv

  1. 5 out of 5

    Nathan C. (verified owner)

    Very nice smooth motors. I quite like that they come with pants for protection and can be disassembled easily for cleaning and repair.

  2. 5 out of 5

    Jamie R. (verified owner)

    Not been in the air yet as I’m still building. Build quality is top

Only logged in customers who have purchased this product may leave a review.