iFlight SucceX-E Mini F7 35A 2-6S Flight Stack w/ DJI

Description

FC // SucceX-E Mini F7

Top Features:

• – Gold-plated plug
• – BlackBox: 8MB
• – Vista HD Plug-and-Play. No need to solder tiny wires.
• – BAT, +5V, 3.3, Start indicator
• – Smartaudio & IRC Tramp VTX protocol supported

Specifications:

• – MCU: STM32F22RET6 216 MHz
• – Gyro: MPU6000
• – Baro: BMP280(I2C）
• – OSD: IFLIGHT OSD （AT7456E）
• – BEC: 5V 2.5A
• – BlackBox: 8MB
• – Uart: 4*UART(UART1, UART2, UART4, UART5)
• – UART1 for VTX HD/Analog Telemetry
• – UART2 for Receiver
• – UART4 for GPS
• – UART5 for ESC Telemetry
• – 4×Dshot/PWM outputs
• – Smartaudio & IRC Tramp VTX protocol supported
• – WS2812 led Strip: Yes
• – Bepper: Yes
• – Firmware: IFLIGHT_SUCCEX_E_F7 4.2.0
• – Outer Size: 27*27mm / 20*20mm φ3 mounting
• – Weight: 4.9g

Physical

• – Mounting hole: 20*20mm，φ3mm
• – Size: 27*27mm

ESC // SucceX-E Mini 35A

Top Features:

• – 6 layers double-sided PCB board
• – 2oz 1.4mm thick power board
• – TDK MLCC Low ESR ceramic capacitors
• – Top grade 2R203 MOSFET

Specification:

• MCU: BB21 F16G
• BLHeliS
• Capacitance: 470uF/50V
• Current Sensor: Yes
• Input: 2-6S LIPO
• Constant: 35A / Burst: 40A
• BEC: No
• Supports up to Dshot600, Proshot, Oneshot, Multishot
• Target: G-H-30
• BLHeliSuite
• download: http://www.mediafire.com/file/1tn449x6815upat/BLHeliSuite16714901.zip/file
• Weight: 6.9g
• Mounting pattern: 20*20, φ3mm with Grommets φ2mm
• Dimensions: 31*30mm (including the power pads)

Included:

• -1pc x SucceX-E mini F7 Flight controller
• -1pc x SucceX-E mini 35A 4in1 ESC