FPV Racing Drones>BNF/PNP Drones>Analog FPV BNF Drones

iFlight Nazgul5 XL5 V2 Analog BNF Freestyle Drone 4S/6S

5.00 out of 5
(2 customer reviews)

Nazgul5 V2 is a 5″ size Freestyle BNF (Bind-and-Fly) quadcopter. It has been updated to the newest XL5 V5 FPV frame. Pre-tuned and setup, add your receiver and everything you need is done! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings.

$389.99

or 6 weekly interest free payments of NZD $64.99 with

Clear

Description

Nazgul5 V2 is a 5″ size BNF (Bind-and-Fly) quadcopter. Pre-tuned and setup, add your receiver and everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

Add your Receiver:

The Nazgul BNF comes with many harnesses to attach directly to your favourite receiver without soldering!
We recommend:

Recommended Battery

Features

  • – 5mm arm design for more durability
  • – Easy-Swap arms
  • – LED illuminated Logo
  • – XING-E 2207 motors and NAZGUL 5140 props
  • – 5″ version also fits 5.1″ style propellers
  • – Popular True-X configuration
  • – TPU crash-guards
  • – Fits both 30.5x and 20x stacks

XL5 V5 frame specs:

  • SucceX-E F4 45A flight stack
  • XING-E 2207 FPV Motor (6S 1800kv / 4S 2750kv)
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 393.4g (without battery)

FACTORY SETUP and WIRING DIAGRAM:

This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks enhance the flight experience.

Reflashed your drone but didn’t backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK

Specifications

Nazgul5 V2 Quad BNF Included Components and Parts

  • Prebuilt and tested Quadcopter
  • 1x XL5 V5 Frame
  • 1x Caddx Ratel, 2.1mm lens camera
  • 1x Albatross RHCP SMA 5.8g antenna
  • 2 sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)
  • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
  • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

FC // SucceX-E F4 Flight controller

  • – MCU:STM32F405
  • – Gyro:MPU6000
  • – Betaflight OSD:YES
  • – Blackbox:8MB
  • – 4X Uarts(1 2 3 6 )
  • – 8 x Dshot/Proshot/Oneshot output
  • – 8 x individual ESC power/ signal pads
  • – 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
  • – VTX telemetry: YES
  • – WS2812 led Strip:YES
  • – Baro:No
  • – Beeper:YES
  • – Input:2-6S(Max 8S)
  • – BEC:5V/2.5A cont
  • – Firmware target : BETAFLIGHTF4
  • – Mounting:30.5*30.5mm,φ4mm with Grommets φ3mm
  • – Dimensions:36*36mm
  • – Weight:7.6g

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

  • – Dimension: 40*43mm
  • – Mounting Holes: 30.5*30.5mm/Φ3mm
  • – Weight: 14.4g
  • – Supports 2-6S Lipo input
  • – STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
  • – Current sensor: YES
  • – BEC: NO
  • – Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
  • – Target: G-H-30 BLS 16.7

VTX// SucceX Force 5.8g 800mW VTX Adjustable

  • – The output power is stable;
  • – Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
  • – Output 48 frequency points,
  • – Frequency lock fast, the boot does not interfere with companions;
  • – Built-in output power self-check function;
  • – Full format video format: NTSC /PAL;
  • – Wide input voltage range. low power consumption:
  •   7V~36V,+12V/[email protected];
  • – Small size:36*36*3mm
  • – Mounting holes 4-M3
  • – Lightweight: 7.2g(excluding antenna)

SucceX-Force 800mW adjustable VTX

Additional Suggested Parts

Additional information

Power Version

4S, 6S

Brand

Protocol

Drone Size

2 reviews for iFlight Nazgul5 XL5 V2 Analog BNF Freestyle Drone 4S/6S

  1. 5 out of 5

    Raymond Lawson (verified owner)

    This is a very nice quad, the build quality is on point. It comes with heaps of extras like 2 sets of props, a number of connectors so you don’t need to solder your receiver to the board, 2 non-slip battery things, spare m3 bolts and m3 nuts, an OSD joystick and a USB lead to connect the flight controller oh and 2 battery straps. A tip when connecting your receiver is to go by the diagram on the flight board but you have to lift it up and look underneath it and it will show you how to plugin 5v, gnd, R2 and T2. There’s not a lot else to set up in beta flight its all been done for you just add your serial receiver provider, test your motor direction and fail-safe while you got your props off and your good to start flying very easy for someone starting out in FPV. Anyways happy flying.

  2. 5 out of 5

    Raymond Lawson (verified owner)

Only logged in customers who have purchased this product may leave a review.