iFlight Nazgul5 DJI HD XL5 V2 BNF Freestyle Drone 4S/6S

Description

Nazgul5 HD V2 is a 5″ size BNF (Bind-and-Fly) quadcopter. Pre-tuned and setup, add your receiver and everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

Add your Receiver:

The Nazgul HD BNF comes with many harnesses to attach directly to your favourite receiver without soldering!
We recommend:

• FrSky R-XSR D16 Receiver
• FrSky XM+ Receiver (No telemetry)
• TBS Crossfire Nano

Features

• – 5mm arm design for more durability
• – Easy-Swap arms
• – LED illuminated Logo
• – XING-E 2207 motors and NAZGUL 5140 props
• – 5″ version also fits 5.1″ style propellers
• – Popular True-X configuration
• – TPU crash-guards
• – Fits both 30.5x and 20x stacks

XL5 V5 frame specs:

• SucceX-E F4 45A flight stack
• XING-E 2207 FPV Motor （6S 1800kv / 4S 2750kv)
• Wheelbase:   240mm*240mm
• Body size: 170*170mm
• Propeller size: 5 inch /5.1 inch
• FC pattern: 30.5*30.5/20*20 mm
• FPV cam spacing: 19mm
• Weight: 393.4g (without battery)

FACTORY SETUP and WIRING DIAGRAM:

This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks enhance the flight experience.

Reflashed your drone but didn’t backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK

Specifications

Nazgul5 HD Quad BNF Included Components and Parts

• Prebuilt and tested Quadcopter
• 1x XL5 V5 Frame
• 1x Caddx Vista Digital HD System Kit
• 1x Albatross LHCP RP-SMA 5.8g antenna
• 2sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)
• 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
• 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

FC // SucceX-E F4 Flight controller

• – Betaflight OSD：YES
• – Beeper：YES
• – Firmware target : BETAFLIGHTF4

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

• – Supports 2-6S Lipo input
• – STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
• – Current sensor: YES
• – Supports: DShot150/300/600/1200/MultiShot/OneShot etc.

VTX// SucceX Force 5.8g 800mW VTX Adjustable

• – Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
• – Output 48 frequencies,

Additional Suggested Parts

• Receiver (Only required if you’re not using the DJI FPV Controller):
  • Budget: FrSky XM+ Receiver
  • Midrange: FrSky R-XSR Diversity Receiver
  • Best: TBS Crossfire Nano Receiver (SE)
• Propellers:
  • HQProp 5×4.5×3 V1S
  • Gemfan 51433
  • Ethix S4 Props
• Controller:
  • Budget: FrSky X9 Lite
  • Midrange: FrSky Taranis QX7 
  • Best: RadioMaster TX16S
• Batteries:
  • 4S Version: GNB 1300mAh 4S or GNB 1550mAh 4S
  • 6S Version: GNB 1000mAh 6S or GNB 1300mAh 6S
• Battery Charger:
  • Budget: EV-PEAK 2-4S Charger (4S Version only)
  • Midrange: ISDT 608AC 50W Smart Battery Charger
  • Best: ISDT D2 200W Dual Channel Battery Charger
• HD Camera:
  • GoPro Session 4/5
  • GoPro Hero 5/6/7/8/9
  • DJI Osmo Action 4K Camera
• FPV Goggles:
  • DJI Goggles
• Tools for Maintenance/Repairs
  • TBS Screwdriver Set
  • TS100 Soldering Iron
  • Ethix 9 Piece Tool Case for Drone Building