FPV Racing Drones>BNF/PNP Drones>Analog FPV PNP Drones

iFlight Nazgul Evoque 6″ F6X/F6D Analogue 6S PNP

5.00 out of 5
(3 customer reviews)

The amazing 6″ Nazgul Evoque F6 6S Analogue, the ultimate in Pre-Built Quads!

$579.99

or 6 weekly interest free payments of NZD $96.66 with

Our technicians can fit your reciever of choice into your drone, configure the FC, and test to enusre you can bind and fly OR you can install it yourself (selection required)

Description

The Secret Of Ultimate Performance Is Passion – iFlight Evoque Series

That was the slogan for our newest approach to creating this piece of art! Fully protected electronics, fully illuminated, coupled with all the latest and greatest electronics we can offer. Months of engineering went into this BNF and all the lessons learned before, making sure that beginners, as well as experienced pilots, would fully enjoy using the new Nazgul Evoque from the first second they use it.

Lightweight Side Panels – Keep Your Rig Clean

Ever felt like a lawnmower cutting through the grass in your early days, props cutting and throwing wet grass all over and inside your flight stack? Well… These days are over! The new side panels will not only protect from wetness but also protect the internals from any strikes hitting off little components from your flight controller.

Secured Integrated XT60 Battery Plug – As Safe, It Can Be

Dangling battery plugs will ALWAYS find a way in your props, there’s always that one time you forgot to secure it properly and almost cut off the cable while flying. There was only one way to get rid of that and we think we might have found a solution. The integrated XT60 connector on the back lets you securely plug in your battery leading all cables away from your props.

High-Performance Electronics – F7 45A Power Stack

Our BLITZ Mini F7 flight control, modern USB type-C plug, 16MB flash for every tuning session, and 5 UARTs for whatever equipment you might possibly wanna use. Power from the gods with our new SucceX Mini 45A ESC packed with high performance Mosfets and a whole bunch of SMD capacitors to filter out possible motor noise besides a pre-installed capacitor on the battery lead.

XING2 Performance Motors – The Best Motors Just Got Better

7075 aluminum bell, 5mm titanium alloy shaft, NSK durable bearings, Center slotted magnets for better response, and lower air gaps for a higher magnetic flux with increased performance and efficiency. Not to mention the typical XING damping ring between the bell and bearing to increase durability and smoothen out your flights.

Illumination – Let It Be Green

360-degree illumination for day and night. Maybe the prettiest BNF out there but also a practical one. The bottom light indicates battery voltage, a quick check gives you a hint of the voltage still remaining; Never lift off with an empty battery again. Installed LED wires in the side panels and the bottom of the arms are also illuminated and gives you some style at the next night’s race.

SucceX Force 600mW – Analog Reliable Power

Equipped with our latest 600mW Mini VTX to go far. Stable power output and fast frequency lock without interfering with other pilots when powering up. VTX telemetry built-in as well as electrical interference filters for whatever noise that might get through and an MMCX antenna connector that doesn’t hop off in wild crashes.

Specifications:

  • Total Dimensions: 255.4mm (Squashed X) / 262.6mm (DeadCat)
  • Geometry: Squashed-X or DC (DeadCat) frame available
  • Bottom to top distance: 28mm
  • Arm Thickness: 6mm
  • Bottom plate thickness: 3mm
  • Top plate thickness: 3mm
  • Upper(middle) plate thickness: 3mm
  • XING2 2506 1500KV motors (Black color from April 2022)
  • HQ 6X2.5X3 Tri-blade Props
  • Weight: 464.3g (without battery and GoPro mount)

FC // BLITZ MINI F7

ESC // BLITZ Mini 55A 

Camera // RaceCam R1 Mini (Analog Version)

VTX // 5.8GHz SucceX Mini Force 600mW VTX 

  • Power: PIT/25/200/400mW/600mW
  • Antenna Interface: MMCX
  • VTX protocol: IRC Tramp
  • Output:  40 channels

Package included:

  • 1 x Nazgul Evoque F6 (Squashed X or Deadcat pattern)
  • 4 x HQ 6X2.5X3 Tri-blade Props (1 set)
  • 2 sets of Battery Pads
  • Battery straps
  • Screws bag

Reccomended Batteries:

CNHL 6s 100C 1300mAh

GNB 6S 130C 1300mAh

GNB 6S 130C 1500mAh

Note:

TBS Crossfire Antenna in images not included

All iFlight PNP/BNFs are tested before shipment to guarantee highest quality.

If you still encounter a problem after receiving your shipment, please immediately contact KiwiQuads ([email protected]) or iFlight customer support (www.iflightrc.freshdesk.com)

Additional information

Brand

Drone Size

Frame Type

,

3 reviews for iFlight Nazgul Evoque 6″ F6X/F6D Analogue 6S PNP

  1. 5 out of 5

    Adam B. (verified owner)

    Really fast and responsive drone, came from a 2.5’ so bit of a difference but good smooth handlinf

  2. 5 out of 5

    William Corban (verified owner)

  3. 5 out of 5

    Antonius Scholte (verified owner)

    She’s a powerful beast. So much fun. And arrived really quick thanks Travis, you’re the best.

Only logged in customers who have purchased this product may leave a review.