FPV Racing Drones>BNF/PNP Drones>Analog FPV BNF Drones

iFlight Chimera4 4″ 4S LR Freestyle Quadcopter w/ Caddx Turbo EOS2 V2 FPV Camera – BNF

Introducing the iFlight Chimera4 4″ 4S LR Freestyle Quadcopter! This 4″ long-range can stay in the air for up to 15mins with at least a 4S 850mAh and comes with the Caddx Turbo EOS2 V2 FPV Camera, XING 1404 motors, and GPS!

$334.99

or 6 weekly interest free payments of NZD $55.83 with

Hurry! Only 2 left in stock

Ships from our Auckland warehouse

SKU: 2009 Category:

Description

Introducing the iFlight Chimera4 4″ 4S LR Freestyle Quadcopter! This 4″ long-range can stay in the air for up to 15mins with at least a 4S 850mAh and comes with the Caddx Turbo EOS2 V2 FPV Camera, XING 1404 motors, and GPS!

The GPS functionality to help you find your way back when flying, and also Betaflight GPS Rescue mode (default OFF to prevent unexpected behavior. Setup instructions included).

Note: F.Port protocol RX input support, telemetry not supported. Batteries and camera mount NOT included. 3000KV motor color may vary.

Video

Features

  • Sub 250g long-range quad
  • XING 1404 3000KV
  • X-Geometry body for high-performance handling and max. authority on the pitch axis
  • DC (DeadCat geometry) bottom plate available (additional item, no props in view)
  • GPS pre-installed for more safety at a distance
  • SucceX-E mini F4 +35A 4in1 ESC Flystack
  • Naked GoPro ready
  • 360° TPU protection, FPV cam protection, and antenna mounts
  • Caddx.us Turbo Eos V2 2.1mm 16:9 NTSC

Specifications

Frame: Chimera4

  • Wheelbase: 178mm
  • Main body dimension: 136.8*114.8mm
  • Bottom to top distance: 28mm
  • Arm thickness: 4mm
  • Bottom plate thickness: 4mm
  • Top plate thickness: 2mm
  • TPU Camera plate thickness: 2mm
  • FC: 25.5*25.5mm/20*20mm/16*16mm
  • FPV Cam: 19mm Micro / 20mm

SucceX-E mini F4 Stack (35A 4-in-1 ESC): SucceX-E mini F4

  • MCU: 168MHz STM32F405
  • Gyro: MPU6000
  • Blackbox: 8MB
  • Betaflight OSD: YES
  • BEC: 5V 2.5A
  • Uarts: 5
  • ESC Telemetry: yes
  • INA Pad: nuart2
  • Input voltage: 2-6S
  • Firmware: BETAFLIGHTF4
  • Size: 25*25mm /20*20mm φ3 mounting
  • Mounting hole: 20*20mm,φ3mm
  • Size: 25*25mm
  • Weight: 4g

SucceX-E mini 35A ESC

  • MCU: BB21 F16G
  • BLHeliS
  • Capacitance: 470uF/50V
  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Constant: 35A / Burst: 40A
  • BEC: No
  • Supports up to Dshot600, Proshot, Oneshot, Multishot
  • Target: G-H-30
  • BLHeliSuite download
  • Weight: 6.9g
  • Mounting pattern: 20*20, φ3mm with Grommets φ2mm
  • Dimensions: 31*30mm (including the power pads)

SucceX-Force 800mW adjustable VTX

Additional Suggested Parts (Not Included)

  • 4S 850mAh/ 4S 1100mAh
  • TPU Naked GoPro Mount

Pre-Tuned & Pre-Setup

  • Don’t worry about tuning, iFlight did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
  • To restore lost tunes or updates, please check iFlight’s linked article on “Firmware/Factory Dumps
  • Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
  • GPS Rescue is OFF by default to prevent from unwanted or unexpected drone behavior.
  • Please check iFlight’s linked article on “GPS Rescue Mode // Setup

Includes

  • 1 x Chimera4 frame
  • 1 x Caddx Turbo EOS2 V2 FPV Camera
  • 2 x Albatross LHCP ipex 160mm antenna
  • 2sets x Nazgul 4030 props (Set of 2 – Color may vary)
  • 2 x 15*150mm Microfiber PU Leather Battery Strap (Color May Vary)

Additional information

Brand

Drone Size

Drone Battery Rating

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.