HappyModel Mobula7 V2 2S F4 FrSky Micro Drone Starter Kit

Description

V2 version has been updated to an F4 Flight Controller along with a black frame.

Happymodel has entered the game with another competitor in the 75mm brushless whoop space. The defining feature being the ability to run on both 1s and 2s batteries depending on how fast you need to go.

This starter package includes 4 batteries, a charger, spare propellers and extras. Everything you need for the drone!

Features

• New Crazybee F4 PRO Flight controller 1-2s Lipo compatible
• Betaflight support, multi-flight mode: ACRO/AIR/ANGLE
• New 0802 Powerful and High-efficiency Brushless motor and Smooth ESC
• Betaflight OSD support, easy to get RSSI, Voltage, current from your goggles
• SmartAudio ready, change VTX bands, channels via OSD
• Adjust the settings and the PID of the flight controller via OSD
• Frsky support D8/D16 compatible
• Full telemetry function ready
• Headlights ready
• Camera angle adjustable
• Real Bind and Fly version
• Buzzer Ready

Specifications

Drone

• Wheelbase: 75mm
• Size: 98mm*98mm*36mm
• Weight: 25.9g (without battery)
• Weight:40g (with Original 250mah lipo battery x2 )

Crazybee F4 V2.0 Pro Flight Controller Item Name: Crazybee F4 Pro FC

• MCU: STM32F411CEUb (72MHZ, 256K FLASH)
• Sensor: MPU-6000 (SPI connection)
• Board size: 28.5 * 28.5MM
• Power supply: 1-2S battery input (DC 3.5-8.7V)
• Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
• Built-in Receiver ( Different version having a different receiver)
• Built-in Betaflight OSD(SPI Control)
• Built-in Current meter Max 28A
• Current meter scale set to 1175
• Built-in 5V 1A BEC with LC filter
• Built-in voltage detection
• BLHELI_S pass-through Ready
• Heading LED Ready

Firmware

• (Frsky version) CRAZYBEEF4 PRO FR Firmware target: CrazybeeF4FR

Onboard 5A 4 In 1 ESC

• Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
• MCU upgraded to EFM8BB21
• Current: 5A continuous peak 6A (3 seconds)
• Support BLHeliSuite programmable
• Factory firmware: S_H_50_REV16_7
• Default protocol: DSHOT600

Onboard Frsky Receiver Version

• SPI BUS receiver
• Frsky D8/D16 switchable
• Compatible Non-EU transmitter both D8 and D16 mode
• Channels: 8ch or 16ch
• Failsafe support
• No ground interference ( Transmitter and receiver 1 m from the ground): 300m

SE0802 16000KV Motor

• Model: SE0802
• KV: 16000KV
• Configuration: 9N12P
• Stator Diameter: 8mm
• Stator Length: 2mm
• Shaft Diameter: F1.0
• Motor Dimension (Dia.*Len) : F10.5*14.5mm
• Weight: 1.8g
• Support 1-2S Lipo

Propeller

• 40mm 4-blade Propeller ( 4 CW + 4 CCW)

5.8G VTX AIO Camera

• 5.8G 40CH 25mW VTX
• Output power: 25mw
• Frequency: 40CH
• Input voltage: 3.3V 5.5V
• Current consumption: 300mA(type)

700TVL FOV120 Camera

• Camera resolution: 700TVL
• Field of view: 120°
• Video Format: NTSC
• Antenna: RG178 antenna
• Frequency: 5.8GHz 5bands 40 channels
• With Raceband
• SmartAudio ready
• Size: 13.9″12.0mm ( L*W )
• Weight: 3g

Lipo Battery

• Capacity:250mAh
• Voltage:3.8v
• Continuous Discharge Rate: 30C
• Instantaneous discharge rate: 60C
• Size: 55mmx12mmx7mm
• Weight: 6.5g
• Connector: PH2.0

Includes

Basic Version

• 1x Mobula7 V2 75mm FPV Drone
• 4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
• 4x 3.8v 250mah 30C/60C Lipo battery
• 1x USB Lipo/LIHV Charger
• 1x Fixing Mount for Lipo Battery
• 1x Propeller Disassemble Tool
• 1x Screwdriver