FPV Racing Drones>BNF/PNP Drones>Analog FPV BNF Drones

Happymodel Mobula6 HD 1S Brushless Whoop (19000KV – Regular Edition)

4.67 out of 5
(3 customer reviews)

The Happymodell Mobula6 HD 1S Whoop is a great racing FPV drone! The  Mobula6 HD is a smooth and agile brushless drone that comes with the Runcam Split3-Lite, AIO 4-in-1 Crazybee F4 Lite FC,  EX0802 19000KV Motors and  many other cool features and specs that make this whoop a must-have!

$219.99

or 6 weekly interest free payments of NZD $36.66 with

Hurry! Only 1 left in stock

Ships from our Auckland warehouse
SKU: 2006 Category:

Description

The Happymodel Mobula6 HD 1S Whoop is a great racing FPV drone! The Mobula6 HD is a smooth and agile brushless drone that comes with the Runcam Split3-Lite, AIO 4-in-1 Crazybee F4 Lite FC, EX0802 19000KV Motors and many other cool features and specs that make this whoop a must-have!

Features

  • AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX
  • Extreme light 1S 65mm Brushless HD whoop only 27g
  • Come with Runcam Split3-lite 1080P HD DVR
  • Smooth and agile
  • Compatible for 1S Lipo/LIHV
  • Camera Angle adjustable

Specifications

  • Brand Name: Happymodel
  • Item Name: Mobula6 HD 1S 65mm Brushless whoop HD drone BNF version
  • Wheelbase: 65mm
  • Size: 80mm*80mm*40mm
  • Weight: 27g
  • Receiver option:
  • Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)

Motor

  • Mode: EX0802 19000KV
  • Configu-ration:9N12P
  • Stator Diamter:8mm
  • Stator Length:2mm
  • Shaft Diameter:Φ1mm
  • Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
  • Weight(g):1.7g
  • No.of Cells(Lipo):1S only

Propellers

  • Gemfan 1219-3
  • Center Thickness:5mm
  • Prop Disk Diameter:31mm
  • Center Hole Inner diameter:1.0mm
  • Weight:0.28g

FC

  • (Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
  • (Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
  • (No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 2-4S battery input (DC 7-17V)
  • Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
  • Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
  • No RX version need to add external Receiver
  • Built-in Betaflight OSD(SPI Control)
  • Built-in Current meter Max 70A
  • Current meter scale set to 470
  • Built-in 5V 1A BEC
  • Built-in voltage detection

Onboard 4-in-1 ESC

  • MCU upgraded to EFM8BB21
  • Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_H_5_REV16_7.HEX
  • Default protocol: DSHOT600

Diamond_VTX

  • Output power: 25mw
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Frequency: 5.8GHz 5bands 40 channels
  • With Race bandSmartaudio ready

Runcam Split3-Lite

  • Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III)
  • Hole Distance of Installation: 25.5*25.5mm
  • PCB Size: 29*29mm
  • Lens Module Size: 14*14mm
  • Lens Specs: M9
  • Power Input: DC 5-20V(Non-direct power supply from the battery. Powered directly with the battery will generate surges and burn the camera.)
  • Working Current: 450mA @5V

Recommended Batteries:

GNB 250mAh 1S

GNB 300mAh 1S

Video

Includes

  • 1 x Mobula6 1S 65mm whoop Drone Frame
  • 4 x EX0802 KV19000 brushless motor
  • 1 x Gemfan 1219-3 Propellers(4cw+4ccw)
  • 1 x Runcam Split3-lite 1080P HD Camera +DVR
  • 1 x 5.8G 25mw 40ch vtx (Flight controller built-in)
  • 1 x 1S 250mah 30C LiHV Battery
  • 1 x 1S Lipo/LIHV USB Charger
  • 1 x Propeller disassemble tool

Additional information

Brand

Drone Battery Rating

Protocol

Drone Size

3 reviews for Happymodel Mobula6 HD 1S Brushless Whoop (19000KV – Regular Edition)

  1. 4 out of 5

    Adam (verified owner)

    I only got this to use the runcam HD for another build awesome 1080p camera.Tried as mob 6 setup but get jello in higher rmp range.Mite be ok if on the mob 7 frame for more control but the camera is all I wanted.

  2. 5 out of 5

    Nash G. (verified owner)

    Best HD tinywhoop

  3. 5 out of 5

    Nathan C. (verified owner)

    Fantastic little drone, flies well and is very durable. At 27.2g I’m not sure it could fly fast enough to damage itself in an impact. Video quality is top notch.

    Flying with GNB Battery 3.8V 30C 350mAh 1S. Bit of a tight fit but gives decent flight times of 4-6mins.

    Highly recommended for someone starting out like me and I suspect it’ll remain relevant even when I move up into larger frames.

Only logged in customers who have purchased this product may leave a review.