FPV Racing Drones>BNF/PNP Drones>Analog FPV BNF Drones

Happymodel Moblite6 1S 65mm Ultra-light Brushless Whoop FPV Racing Drone

5.00 out of 5
(1 customer review)

Boasting up to 7 minutes flight time, the new Moblite6 from HappyModel features an ultra-light and endurance focused design.

  • Only 18.5 grams!
  • 25/200mW VTX switchable
  • 300mAh endurance battery


or 6 weekly interest free payments of NZD $28.33 with

Out of stock

SKU: 2088 Categories: ,



  • The lightest 1s 65mm brushless whoop
  • Powerful and efficienct
  • The lightest 1s AIO 5IN1 F4 flight controller
  • New Unibell EX0802 brushless motors
  • Low profile Canopy design
  • VTX power switchable 25mw~200mw


  • Brand Name: Happymodel
  • Item Name: Moblite6 1S 65mm ultra light brushless whoop
  • Wheelbase: 65mm
  • Size: 80mm*80mm*25mm
  • Weight: 18.5g (without battery)
  • Weight: 26g(with Original 1s 300mah Lipo battery )
  • Motor
    Model: EX 0802 19000KV
    Stator Diameter:8mm
    Stator Length:2mm
    Shaft Diameter:Φ1mm
    Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
    No.of Cells(Lipo):1S only
  • Flight controller
    (Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR
    MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
    Sensor: MPU-6000(SPI connection)
    Original whoop size compatible
    Power supply: 1S battery input (DC 2.9V-4.35V)
    Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
    Built-in Betaflight OSD(SPI Control)
    Built-in 5.8G VTX
    Built-in SPI Frsky/Flysky receiver
    Built-in 5V 1A BEC
  • Onboard 4in1 ESC
    MCU upgraded to EFM8BB21
    Power supply: 1S LiPo/LiPo HV
    Current: 5A continuous peak 6A (3 seconds)
    Support BLHeliSuite programmable
    Factory firmware: O_H_50_REV16_8.HEX
    Default protocol: DSHOT600
  • Onboard Frsky SPI D8 receiver Version
    SPI BUS receiver Frsky D8 compatible
    Compatible Non EU transmitter D8 model
    Channels: 8ch
    Failsafe support
    No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
  • Onboard 5.8g VTX
    Output power: 25mw~200mw switchable
    Frequency: 40CH
    Input voltage: 3.3V 5.5V
    Current consumption: 300mA(type)
    Frequency: 5.8GHz 5bands 40 channels(include Race band)
    Smartaudio ready


  • HappyModel Moblite6 Ultra-light FPV drone FrSky
  • 2 x 300mAh 1S LiPo Battery
  • 1 x Spare set of Gemfan 1219 31mm Propellers
  • Propeller disassemble tool
  • Screwdriver
  • Happymodel Carry case

Additional information


Drone Battery Rating

Drone Size

1 review for Happymodel Moblite6 1S 65mm Ultra-light Brushless Whoop FPV Racing Drone

  1. 5 out of 5

    Enqi Huang (verified owner)

Only logged in customers who have purchased this product may leave a review.