“TBS Sixty9 9-Pin Pigtail Harness” has been added to your cart. View cart
BetaFPV BT2.0 Connectors (5 Male & 5 Female)
by BetaFPV
5.00 out of 5
(10 customer reviews)
$10.99
In Stock at KiwiQuads
Ships from our Tauranga warehouse
SKU: 1825
Categories: Adapters & Connectors, Battery Accessories
Description
BT2.0 Connector – the most significant revolution in 1S Tiny Whoop Drone.
Not sure if it’s worth switching to BT2.0? Check more from Joshua Bardwell‘video- Proof that the BT2.0 connector is better than PH 2.0.
- BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to banana connector and increasing the cross-sectional area of banana connector.
- With these connectors, it can support 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current.
- By solving the problem of voltage sag, the discharge of the 300mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning.
- Compared with the PH2.0 crimped pins, BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power. You can get 2mins flight time in full throttle on Meteor65 if you use our BT2.0 300mah 1S Battery.

SPECIFICATION
- Size: Male Connector –Â 6.0*4.2*10.5mm / Female Connector –Â 6.0*4.2*8.3mm
- Weight: Male Connector- 0.34g/PCS / Female Connector – 0.24g/PCS
- Note:Â The terminal molded case identifies the positive and negative poles, and must be welded according to the instructions.
PACKAGE
- 5* BT2.0 Female Connector & 5 * BT2.0 Male Connector
10 reviews for BetaFPV BT2.0 Connectors (5 Male & 5 Female)
Only logged in customers who have purchased this product may leave a review.
Related products
-
3S 4-Pin Silicone Balance Cable
4.67 out of 5(6) $2.49In stockAdd to cart -
Amass XT30 2-6S Parallel Charging Board
4.86 out of 5(7) $39.99In stockAdd to cart -
Mateksys Micro BEC 12S/60V Input to 5V/9V/12V
4.67 out of 5(3) $14.99In stockAdd to cart -
4S 5-Pin Silicone Balance Cable
4.79 out of 5(24) $2.49In stockAdd to cart -
XT60 Parallel Balance Charging Board 2-6S
4.95 out of 5(62) $18.99In stockAdd to cart -
CellMeter 8 2-8S Battery Tester and Cell Checker
4.91 out of 5(32) $21.99Out of stockRead more
Explore more from BetaFPV
-
New!
BetaFPV Meteor75 Pro O4 Brushless Whoop Quadcopter – BYO VTx
$199.99In stockAdd to cart -
New!
BetaFPV Pavo20 Pro Brushless Whoop Frame for O4 Pro
$29.99In stockAdd to cart -
New!
BetaFPV ND Filter Set for DJI O4 Pro Camera (Set of 4)
5.00 out of 5(1) $57.99Coming SoonRead more -
BetaFPV 0702 II / 0702SE II Brushless Motors V2 (4PCS) (23000kv/27000kv/3000kv)
$99.99 – $119.99In stockSelect options This product has multiple variants. The options may be chosen on the product page -
BetaFPV Matrix 1S Brushless Flight Controller G4 3IN1 HD V1.0
$89.99Out of stockRead more -
BetaFPV Meteor 75 Pro O4 HD Brushless Whoop
$429.99In stockAdd to cart
Other Adapters & Connectors you might like
-
GNB A30 Female to PH2 Adaptor for Charger
4.50 out of 5(2) $2.99In stockAdd to cart -
Amass Gold Connector 3.5mm 10 sockets + 10 plugs
5.00 out of 5(1) $9.99In stockAdd to cart -
Foxeer Camera to TBS Unify Silicon Cable
5.00 out of 5(2) $6.99In stockAdd to cart -
GNB27 Female Connector Plug (Drone side)
5.00 out of 5(2) $1.99In stockAdd to cart -
Amass XT60EW-M Black Panel Mount
5.00 out of 5(10) $2.99In stockAdd to cart -
JST Connector Plug Male/Female Pair
$1.99In stockAdd to cart
Other Battery Accessories you might like
-
XT60 Parallel Adapter Cable 10cm Connector
5.00 out of 5(9) $6.99In stockAdd to cart -
Charging Cable XT60 Female Plug to TRX Male 20cm
4.80 out of 5(5) $6.99In stockAdd to cart -
2S 3-Pin Silicone Balance Cable
$2.49In stockAdd to cart -
ToolkitRC MC8 Multi-Functional 2-8S Battery Checker and Balancer
5.00 out of 5(5) $69.99Out of stockRead more -
Amass XT90 Connector Pair
5.00 out of 5(18) $5.69In stockAdd to cart -
SWAGGER Straps Slim Unbreakable 260mm (2 Pieces)
5.00 out of 5(3) $12.99Out of stockRead more
Marc C. (verified owner) –
Connectors seem solid – will replace my PH2 connectors with these
Kerry H. (verified owner) –
Cheers lads
Fintan Creagh (verified owner) –
look good, will hopefully have better performance
Fintan Creagh (verified owner) –
makes a huge difference compared to ph2.0
be careful with iron temp because the pins can slip out at high temps
Terry C. (verified owner) –
Anonymous (verified owner) –
Buddy M. (verified owner) –
Anonymous (verified owner) –
Handy to have